Call:
800.876.5340
Email:
mail@dunhamrubber.com
Home
Catalog
Services
About Us
News
Contact Us
Request Information
Registered Users
–
Sign In
Shopping Cart
0 Items
Request for Quote
0 Items
All Categories
>
Sanitary Hose and Fittings
>
High Purity Tubing, Hose & Fittings
>
FDA & Process Tubing
>
Silcon® Med-X Platinum-Cured Medical Grade Silicon Tubing
>
Item # 284 1377
Download PDF
Download PDF
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # 284 1377, Silcon® Med-X Platinum-Cured Medical Grade Silicon Tubing
List Price QUOTE
larger image
Silicone elastomer meets USP Class VI requirements
Manufactured under strict Good Manufacturing Practices (GMP) in a controlled environment
Platinum cured for the highest degree of purity (least extractables)
Reusable - will withstand repeated sterilization (If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.)
Nonreactive to body tissues and fluids
Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling
Notes
SILCON MED-X tubing is made under strict accordance with FDA Good Manufacturing Practices (GMP) and conforms to the biocompatibility requirements of USP Class VI.
SILCON MED-X’s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening.
Other sizes and 60A durometer material are also available.
SILCON MED-X is not recommended for implantable or in-body uses.
Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall.
SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use.
Specifications
·
Physical Properties
Specifications
I.D.
5/16
in
O.D.
0.500
in
Wall
3/32
in
Standard Coil Length
50
ft
Physical Properties
Hardness, Shore A ±5
50
Tensile Strength
1100
psi
Elongation at Break
650
%
Modulus at 100 %
120
%
Tear Resistance, Die B
200
ppi
Temperature Range
-100 to 400
ºF
-73.3 to 204.4
ºC
Compression Set
35
%
Notes
Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
