Item # 340 0152, Corrtef® Corrugated FEP Tubing On Dunham Rubber & Belting Corp.

Registered Users – Sign In


Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Sanitary Hose and Fittings > High Purity Tubing, Hose & Fittings > FDA & Process Tubing > Corrtef® Corrugated FEP Tubing > Item # 340 0152


	Item # 340 0152, Corrtef® Corrugated FEP Tubing
	List Price QUOTE

Made from FEP fluoropolymer tubing
Corrugations allow a nearly zero bend radius - easily flexed
Can be extended or compressed without affecting the tube's I.D.
Made from FDA-sanctioned ingredients
Made without plasticizers which can leach into critical streams
Has all the chemical and electrical properties of straight-walled FEP tubing
May be over braided with Kevlar® for higher pressures. (Over braiding with Kevlar will permit a minimum increase of six times the listed pressures. Kevlar over braiding is available for sizes up to 7/8" I.D.)

Notes

Vacuum Service: 29.9 in./Hg.
Bend Diameter: 1/2 of tubing I.D.
Extension/Compression Length Ratio: 2 to 1

Optimal flow is achieved and turbulence minimized by passing fluids through CORRTEF in the direction of the corrugation angles (as illustrated).

CORRTEF is heat sealable, and the cuffs (straight ends) are made to accept standard barbed fittings. The end may be flared or expanded to permit shrink-tight connections.

CORRTEF is manufactured in an industrial atmosphere and should be properly sterilized for dean-flow applications. For optimal cleaning of CORRTEF, the tube should be stretched to its maximum length and held vertically (direction of flow: down). Due to the annular corrugations, it may not be possible to remove all traces of particulate from CORRTEF, even under optimal cleaning conditions.

larger image

larger image

Specifications · Physical Properties

Specifications

Max. I.D. (Dim. A)

3/8 in

Dim.- B¹

1 in

Dim. C

0.020 in

Dim. D (Ref.)

9/16 in

Working Pressure at 70ºF

50 psi

Burst Pressure at 70ºF

200 psi

¹ Workable I.D. length of the cuff (straight ends). All lengths supplied with 'B' dimension cuffs.

Physical Properties

Hardness, Shore D

50-55

Tensile Strength

3500 psi

Elongation at Break

325 %

Brittle Temperature¹

<-275 ºF

Min. Continuous Svc. Brittle Temp.²

-100 ºF

Max. Operating Temp.³

400 ºF

Max. Cont. Svc. Temp., Zero Pressure⁴

200 ºF

Notes

Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

¹ Temperatures are for standard extruded (non-coiled) tubing.
² Temperatures are for standard extruded (non-coiled) tubing.
³ Temperatures are for standard extruded (non-coiled) tubing.
⁴ Temperatures are for standard extruded (non-coiled) tubing.

Item # 340 0152, Corrtef® Corrugated FEP Tubing