Item # Aero 1200, Novitool® Portable Splice Press On Dunham Rubber & Belting Corp.

Registered Users – Sign In


Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Conveyor Belts and Accessories > Industrial Conveyor Belting > Mechanical Belt Fasteners & Tools > Conveyor Belt Tools > Novitool® Portable Splice Press > Item # Aero 1200


	Item # Aero 1200, Novitool® Portable Splice Press
	List Price QUOTE

The All In One Splice Press

The Aero™ Press is revolutionizing the splicing industry due to its ease of use and quick cycle time. This air cooled press has all components integrated into the tool, allowing a user to simply plug it into electricity and it is ready for use.

Efficient & Fast Splicing - All In One.

Once taken from the flight case the unit is fully operational and ready to splice. There are no external systems such as water tanks and pumps needed. All functions and subsystems are integrated into the press. The press has an integrated air-cooling system which ensures that the belt is quickly cooled down. This increases the splice quality and the operating speed of the press. For most belt materials, the entire operation can be completed within 7 to 12 minutes. This means a minimum interruption of the processes in which the conveyor bells are used.

Less Downtime - Splice in 7-12 minutes.

All-In-One Unit - No external components.

Integrated Air Cooling - No water required.

Portable Equipment - Flight case included.

Aero™ Specifications

The Aero™ splice press is available in five different models ranging in width from 24" (300 mm) to 60" (1500 mm). The unit operates on most common voltages. The Aero™ splice press can be used for splicing PVC and polyurethane belt materials ranging in width from 1/2 - 60" (10 to 1524 mm) depending on the model.

Easy to operate and excellent splice repeatability

The Aero™ has two controllers. One for adjustment of temperature and time and one for setting the pressure generated by the built-in compressor. The material / splice specific pressure and temperature values are easily set and the splicing operation itself is fully automatic. The temperature controller has a scrolling display which navigates the user through the settings in clear text messages.

With two quick-clamping bars it is easy to position and fasten the material in the press. The clamping bars ensure that the material remains in position during the entire splicing process.

Temperature control and cooling

With the Aero™ press, the user can set different splice temperatures for the upper and lower plate or use a single temperature for both platens. This function makes it easy to obtain even better splice results for belt materials with a fabric inlay or coating.

Unique programming features enable a more precise setting of the dwell time (down to seconds), an automatic dwell time countdown and a preheating cycle. A controlled - stepped - preheating will provide better splice results with thicker or less heat conducting belt materials.

The splice platens have integrated cool zones on both sides of the heating zone, This will result in ultra smooth splices even for the most difficult belt materials. No inlays of glass fibre or stainless steel are used which may cause pressure differences. The applied pressure will be the same at any point of the splicing plate. This design results in:

No sinking of the hot splice plates into the molten belt material
No bumps next to the splice
Less shrinkage of the fingers
Diminished shiny lines

With conventional systems these malformations are often difficult to control and will require possible process adjustments, trial runs and a lot of craftsmanship. However, the Aero™ can be operated with minimal training. With the right predefined settings the unit generates repeatable, high quality splices time after time.

larger image

larger image

Specifications · Power Requirements

Specifications

Effective Length		48 in 1219 mm

Effective Width		5.1 in 130 mm

Weight Lower Part		55 lbs 25 kg

Weight Upper Part		48 lbs 22 kg

Total Weight		104 lbs 47 kg

Length		55.3 in 1405 mm

Overall Height		8.5 in 220 mm

Max. Pressure		28 psi 2 bar

Max. Temperature		390 ºF 200 ºC

Dimensions for Transport (L x W x H)		68 x 15 x 12 in 1726 x 370 x 310 mm

Weight for Transport		117 lbs 53 kg

Power Requirements

1 Phase 230 VAC		30 A (U.S. only)

3 Phase 230 VAC		12 A

3 Phase 400 VAC + 0		12 A

3 Phase 460 VAC		12 A

MORE IMAGES


	· Novitool® Portable Splice Press - 3

	· Novitool® Portable Splice Press - 4

	· Novitool® Portable Splice Press - 5

	· Easy to Operate - Top Part is Lifted for Maximum Access

	· Easy to Operate - Easy Clamping and Material Alignment

	· Easy to Operate - Setting Temperature and Pressure Controller

	· Splice Platens

Item # Aero 1200, Novitool® Portable Splice Press

Effective Length

Effective Width

Weight Lower Part

Weight Upper Part

Total Weight

Length

Overall Height

Max. Pressure

Max. Temperature

Dimensions for Transport (L x W x H)

Weight for Transport

1 Phase 230 VAC

3 Phase 230 VAC

3 Phase 400 VAC + 0

3 Phase 460 VAC