Item # B10, Boss Clamps On Dunham Rubber & Belting Corp.

Registered Users – Sign In

Features

Replacement nuts and bolts are available, contact the factory for more information.
The bolts used in the Boss interlocking clamps are not standard bolts. They vary from standard bolts in their length, diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended that, the bolts or clamps be reused, as they are designed for a single bend only. Dixon recommends using only factory supplied replacement bolts.
Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Do not lubricate nuts and bolts.
Recommended torque rating in ft. lbs.

Safety Alert: Boss couplings and the steam quick disconnects are the only Dixon couplers recommended for steam service

Specifications

Hose ID		3/4 in

Hose OD		1-32/64 to 1-44/64 in

Material		Plated Iron

Torque		21 in

Opt Qty		25

Notes		Global investment cast carbon steel

Item # B10, Boss Clamps