Construction
Extruded PTFE tube with stainless steel single wire braid.

Application
Hot air, steam, compressor discharge and most chemical reactions. Not recommended for steam-cold water cycling.

Operating Temperature Range
-100°F to +500°F (-73°C to +260°C)

SAE 100R14A

-Maximum negative pressure for -06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PRFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.


PTFE Crimp Fittings
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Hose I.D.

Hose O.D.

Max. Operating Pressure

Min. Burst Pressure

Min. Bend Radius

Vacuum Service

Weight/ft.

2807-3 N/A 0.14 inches N/A 0.25 inches N/A 3000 psi N/A 12000 psi N/A 1.50 inches N/A 28 inches of Hg N/A 0.04 lbs.
2807-4 N/A 0.19 inches N/A 0.30 inches N/A 3000 psi N/A 12000 psi N/A 2.00 inches N/A 28 inches of Hg N/A 0.06 lbs.
2807-5 N/A 0.26 inches N/A 0.37 inches N/A 3000 psi N/A 12000 psi N/A 3.00 inches N/A 28 inches of Hg N/A 0.08 lbs.
2807-6 N/A 0.32 inches N/A 0.43 inches N/A 2500 psi N/A 10000 psi N/A 4.00 inches N/A 28 inches of Hg N/A 0.10 lbs.
2807-8 N/A .42 inches N/A .54 inches N/A 2000 psi N/A 8000 psi N/A 5.25 inches N/A 28 inches of Hg N/A .12 lbs.
2807-10 N/A .51 inches N/A .63 inches N/A 1500 psi N/A 6000 psi N/A 6.50 inches N/A 28 inches of Hg N/A .16 lbs.
2807-12 N/A .64 inches N/A .76 inches N/A 1200 psi N/A 4800 psi N/A 7.75 inches N/A 28 inches of Hg N/A .18 lbs.
2807-16 N/A .88 inches N/A 1.03 inches N/A 1000 psi N/A 4000 psi N/A 9.00 inches N/A 12 inches of Hg N/A .26 lbs.
2807-20 N/A 1.12 inches N/A 1.29 inches N/A 625 psi N/A 2500 psi N/A 16.00 inches N/A 12 inches of Hg N/A .34 lbs.
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1