• Aeroquip GH134 EZ Clip Hose

    SAE J2064 Type E Class 1

    Construction

    • Internal polyamide veneer tube
    • Synthetic –rubber backing layer
    • Stabilized, synthetic braided reinforcement
    • Chlorobutyl rubber cover
    • E-Z Clip fittings

    Application
    Transportation, refrigeration and air conditioning systems

    Operating Temperature Range
    -40°F to +275°F (-40°C to +135°C)

    R404a Effusion
    0.2 lbs/ft2/yr. at 140°F (0.8 kg/m2/yr. at 60°C)

    HFC 134a Effusion
    0.50 lbs/ft2/yr. at 176°F (2.42 kg/m2/yr. at 60°C)

    Moisture Ingression
    0.80gm/ft2/yr. (.013 /cm2/yr)

    Benefits

    • Excellent effusion resistance
    • Maximum resistance to moisture ingression
    • Extended service performance
    • Superior coupling integrity
    • Assured coupling integrity, exceeds SAE J2064 performance

    *E-Z Clip has been designed and engineered to work EXCLUSIVELY with Aeroquip GH134 hose. Size -04 has been designed to work with FC505 hose.

  • Aeroquip FC802 Muti-Refrigerant Hose

    Construction

    • Bromobutyl cover
    • Polyamide-veneer tube
    • Synthetic braid reinforcement
    • Synthetic rubber backing layer
    • SAE 100R5 reusable fittings

    Operating Temperature Range
    -40°F to +250°F (-40°C to +121°C)

    HFC 134a Effusion
    0.25 lbs/ft2/yr at 176°F (1.21 kg/m2/yr at 80°C)

    Moisture Ingression
    0.80gm/in.2/yr (.013 /cm2/yr)

    R-12 Effusion
    1.25 lbs/ft2/yr at 176°F (6.07 kg/m2/yr at 80°C)

    R-401B Effusion
    2.86 lbs/ft2/yr at 176°F (13.88 kg/m2/yr at 80°C)

    R-22 Effusion
    18.04 lbs/ft2/yr at 176°F (87.55 kg/m2/yr at 80°C)

    Benefits

    • Excellent flexibility and heat resistance
    • Maximum effusion resistance
    • Superior resistance to moisture ingression
    • Excellent noise and kink resistance
    • Field attachable fittings
    • Ease of installation and routing

  • Aeroquip FC558 Refrigeration/ Air Conditioning Hose

    Construction

    • Butyl rubber tube
    • High tensile steel wire reinforcement
    • Synthetic rubber insulation layer
    • Polyester braid cover
    • SAE 100R5 reusable fittings

    Operating Temperature Range
    -40°F to +250°F (-40°C to +121°C)

    R-134a Effusion
    5.5 lbs/ft2/yr at 176°F

    Moisture Ingression
    0.80gm/in.2/yr

    Benefits

    • Excellent effusion resistance
    • Extended service life
    • Maximum resistance to moisture ingression
    • Superior abrasion resistance
    • Field attachable fittings

  • Aeroquip Thermoplastic Hydraulic Hose

    SAE 100R7 Construction: Thermoplastic elastomer tube, single braid polyester reinforcement and a black perforated polyurethane cover.

    Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, pneumatic, fuel, and lubricating systems.

  • Aeroquip Thermoplastic Hydraulic Hose

    SAE 100R7 Nonconductive Construction: Thermoplastic elastomer tube, single braid polyester reinforcement and an orange nonperforated polyurethane cover.

    Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems.

  • Aeroquip Thermoplastic Hydraulic Hose

    SAE 100R8 Construction: Thermoplastic elastomer tube, single braid aramid reinforcement and a black perforated polyurethane cover.

    Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, pneumatic, fuel, and lubricating systems.

  • Aeroquip Thermoplastic Hydraulic Hose

    SAE 100R8-High Pressure-Nonconductive Construction: Thermoplastic elastomer tube, single braid aramid reinforcement and an orange nonperforated polyurethane cover.

    Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems.

  • Polyon Thermoplstic Twin Line Hose

    Aeroquip Polyon™/ Thermoplastic hose is available in a twin line configuration where 2 hoses are permanently joined. Polyon™ twin-line hoses may be seperated at the ends to permit fitting attachement.

    Series FC901 (FC373) is SAE 100R7 Nonconductive hose.

    Series FC902 (FC372) is SAE 100R7 hose.

    Series FC914 (FC374) is SAE 100R8 hose.

    Series FC916 is SAE 100R8 Nonconductive hose.

    Available in 3/16", 1/4", 5/16" (FC901 & FC902), 3/8", 1/2", 3/4" and 1" I.D. sizes

    Application: Ideal for lift trucks, aerial lifts, and hydraulic cranes. The advantage is easier installation.

  • Aeroquip 2807 PTFE Hose

    Construction
    Extruded PTFE tube with stainless steel single wire braid.

    Application
    Hot air, steam, compressor discharge and most chemical reactions. Not recommended for steam-cold water cycling.

    Operating Temperature Range
    -100°F to +500°F (-73°C to +260°C)

    SAE 100R14A

    -Maximum negative pressure for -06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PRFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.


    PTFE Crimp Fittings

  • Aeroquip 1531 Railroad Air Brake Hose

    Construction
    Synthetic rubber tube, partial textile braid, wire reinforcement (1531-10 and 1531-12 have single wire braid; 1531-16, 1531-20, and 1531A-24 have double wire braid) and synthetic rubber cover.

    Application
    Locomotive airbrake lines.

    Operating Temperature Range
    -65°F to +212°F (-54°C to +100°C)

    Exceeds AAR-M618

  • Aeroquip FC321 LPG Hose

    UL listing MH6044 Construction: Synthetic rubber tube, a textile inner braid, a stainless steel wire braid reinforcement and a synthetic rubber impregnated textile braid cover.

    Application: Designed for butane-propane applications on either mobile or stationary equipment.

  • SS Braid PTFE Hose

    Everflex Conv-O-Crimp 8000 Series hose provides excellent performance, reliability and durability under a wide range of environmental, pressure, temperature and chemical conditions. When compared with large diameter rubber hose, Conv-O-Crimp is dramatically lighter weight, more flexible, and more resistant to heat and chemicals. The tube is fabricated with tape of PTFE and reinforced with 304 stainless steel wire. The result is a product ideally suited for applications in truck and bus, chemical processing, food processing, hydraulics, pharmaceutical, tire manufacturing, steel mills, and many others. In addition to the standard 8000 Series virgin white tube of PTFE, the 8500 Series has an internal conductive static dissipating black liner that provides a path to the hose end fitting for applications where flow induced electrostatic charges can occur.

    Construction: Convoluted PTFE tube with 304 stainless steel wire braid reinforcement.

    Operating Temperature Range: -65ºF to +400ºF

    Industrial applications include: Automotive, Platten Presses, Biodiesel Transfer, Pharmaceutical, Bus & Truck, Reverse Osmosis, Hydraulics, Chemical Processing, Steam, Air, Water, Tire Manufacturing, Electronics, Steel Mills, Food Processing and Tank Truck Transfer.

  • FC352 Silicone Coolant Hose

    Eaton Aeroquip offers FC352 Silicone Coolant Hose which features a silicone rubber tube and cover, four spiral nylon reinforcement and industry standard band clamps and couplings.  Service temperature range are -65º F to +350º F.  Please browse this category and contact Customer Service by e-mail or toll free 1-800-876-5340 with any questions.