Smooth Bore Flouropolymer-Lined Hose On Dunham Rubber & Belting Corp.

Request Information

Bioflex Ultra--General Purpose Liner

Bioflex Ultra--Anti-Static PTFE Liner

Purpose
Bioflex Ultra AS is an essential requirement in applications where there is the risk of an electrostatic charge build-up on the inside surface of the PRFE tube which may then discharge through the tube wall. Media passing through which create such a risk are fluids which have a Conductance of less than 10⁸ S/m (Siemens per Meter), or 10⁴ pS/m such as fuels, solvents, freons, some WFI (ultra-pure “Water for Injection”) and non-polar organics which are being transferred at a medium to high flow velocity.

All twin or multi phase media, and any non-mixing media, such as power in air, or water droplets in steam, in gases or in oil, also colloidal fluids constitute a particular hazard for static charge generation, and always require grade AS.

Design & Approvals
Bioflex Ultra AS is an anti-static PTFE liner manufactured from FDA 21 CFR 177.1550 approved PTFE, mixed with less than 2.5% of ‘high purity’ Carbon Black as material to FDA requirement 21 CFR 178.3297. Bioflex Ultra AS grade also meets the requirements of EC Directive 2007/19/EC. The carbon is encapsulated by the PTFE, and in normal, non-abrasive applications will not come loose to contaminate any fluid passing through.

Bioflex Ultra AS also conforms to USP Class VI, at 37°C (99°F), 70°C (158°F), and at 121°C (250°F).

Antistatic Hose Assemblies
When “AS” (Antistatic) grade hose is specified, then the hose or hose assembly supplied will be tested in accordance with EN ISO 8031 and meet the Antistatic requirements of EN ISO 8031 Annex A. This requires, for an antistatic liner or antistatic cover, that the resistance between an appropriately placed foam electrode and a metallic end fitting will be between 10³ to 10⁸ohms per assembly. For hose assemblies which meet these requirements an appropriate Grade “Ω” marking can be applied in accordance with EN ISO 8031 Annex A if requested.

Note: When in service, at least one end fitting must be connected to earth, to permit dissipation of the static charge from the end fitting.

Pharmaline Smoothbore PTFE Lined Hose

(5) Pharmaline is a unique, genuinely smoothbore PTFE-Lined hose product, based on a patented PTFE hose liner tube design. Pharmaline is designed to overcome the very poor flexibility of currently available similar smoothbore products. The only products which can match the flexibility of Pharmaline are convoluted PTFE lined hose products, sometimes misleadingly referred to as "smoothbore" or "smoothflex", even when the bore is actually convoluted.

APPLICATIONS

Pharmaline is designed for use in high purity Pharmaceutical, Biotech, Chemical and Foodstuffs application areas where ease of cleaning the hose is required, both internal and external. It is also very suitable for use in other general industrial applications, particularly those where hot fluids or gases are being passed, and if there is any risk of burns due to accidental touching of the hose - for example, hot oil or steam transfer applications.

ALTERNATIVE PRODUCTS

Pharmalex (leaflet available) is a lower pressure, lighter duty alternative to Pharmaline. Pharmalex is the same as Pharmaline, but without any wire braid, and with a transparent silicone Rubber cover.

HOSE TYPES, DESIGNS & APPROVALS

Pharmaline GP has a PTFE hose liner tube, manufactured from PTFE material in accordance with FDA requirement 21 CFR 177.1550.

An antistatic option is also available, Pharmaline AS, using liner material in accordance with the FDA requirement 21 CFR 178.3297.

Both Pharmaline GP and Pharmaline AS have been tested and the PTFE liners comply with USP Class VI, including the Elution (Cytotoxicity) test.

Both include grade 304 SS wire braid and a Platinum Cured white silicone rubber cover (Post-cured 4 hours at 200°C in accordance with requirements for USP Class VI). The Silicone Rubber material is in accordance with FDA requirement CFR-177-2600.

Alternative colors of the silicone rubber cover are also available, to special order. Clear, transparent silicone is one alternative, which is USP VI approved and permits inspection of the inner braid condition.

Pharmaline GP and AS are available in 1/4", 3/8", 1/2", 3/4" and 1" bore sizes.

ADVANTAGES OVER CONVENTIONAL HOSE DESIGNS

Pharmaline can be used to replace silicone rubber hoses, particularly where the much better chemical resistance and ease of cleaning of the PTFE hose liner is an advantage.
Unlike silicone rubber hoses, Pharmaline can be steam sterilised any number of times, without degradation of the hose liner.
Pharmaline can be used to replace conventional smoothbore PTFE lined hoses in applications where the much better flexibility of Pharmaline is an advantage.
Pharmaline is smaller in O/D and lighter in weight than its nearest rival product because the construction does not include any glass fibre filler layers. The PTFE weight per unit length, however is higher.

PROPERTIES

Temperature Range: -60°c (-80°F) to +200°C (400°F).
Pressure vs Temperature - Pressure ratings are as listed up to 130°C (266°F), then reducing at 1% per 1°C (1.8°F) up to 200°C (400°F).
Vacuum - All sizes fully vacuum resistant up to 130°C.

END FITTINGS

Sanitary and Mini Sanitary Triclamp (Triclover) fittings in 316SS, with bores polished to <0.375µm (<15µ in) and electroplished.
I-Line Fittings.
Compression Fittings (Style 31 and 32).
BSPT and NPT Fixed Male Pipe Fittings.
Flanges, Camlocks, DIN 11851, RJT, SMS, RJP and others to special order.

IDENTIFICATION OPTIONS

Silicone encapsulated color coding, and / or text information to suit customers requirements.
'Flotag' RFID chip, programmed to suit customers requirements.
Unique Serial Numbers and other information for each hose, stamped on ferrules or SS tags, to give total traceability.