• Image

    Purpose
    Pharmallne X GP hose is the 'General Purpose' grade, for use in all applications where fluids or gases being conveyed which do not generate a risk of static charge delvelopment.


    Materials & Specifications

    GP Grade has a virgin PTFE liner, manufactured from hose grade PTFE which conforms to the requirements of:

    FDA 21 CFR 177.1550

    Both the PTFE liner tube and the platinum cured silicone rubber covers have been tested and conform to the requirements of SU Class VI. Additionally, the PTFE liner tube meets the requirements of USP Class VI at 121°C (250°F)

    Both the Braid and Helix wires are high tensile Grade 316L Stainless Steel.

  • Image

    Purpose

    Pharmaline X AS Grade is an essential requirement in applications where there is the risk of an electrostatic charge build-up on the inside surface of the PTFE tube which may then discharge through the tube wall. Media passing through which create such a risk are fluids which have a Conductance of less than 10-8 S/m (Siemens per Meter), or 10+4 pS/m such as fuels, solvent, freons, some WFI (ultra-pure “Water for injection”) and non-polar organics which are being transferred at a medium to high flow velocity.

    All twin or multi-phase media, any non-mixing media, such as powder in air, or water droplets in steam, in gases or in oil, also colloidal fluids constitute a particular hazard for static charge generation, and always required grade AS.

     

    Materials & Specifications

    Pharmaline X AS Grade hose has a black anti-static PTFE liner manufactured from FDA 21 CFR 177,1550 approved PTFE, and less than 2.5% of “high purity” Carbon Black material to FDA requirement 21 CFR 178,3297 and European Commission Directive 2007/19/EC. AS Grade also conforms to the requirements of USP Class VI, at 37°C (99°F), 70°C(158°F) and 121°C(250°F).