Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Tube OD

Dimension A

Material

13MHHM-Q75 N/A 1/2 to 3/4 in N/A 1.062 in N/A 304 Stainless Steel
13MHHM-Q100150 N/A 1 to 1-1/2 in N/A 2.122 in N/A 304 Stainless Steel
13MHHM-Q200 N/A 2 in N/A 2.654 in N/A 304 Stainless Steel
13MHHM-Q250 N/A 2-1/2 in N/A 3.185 in N/A 304 Stainless Steel
13MHHM-Q300 N/A 3 in N/A 3.717 in N/A 304 Stainless Steel
13MHHM-Q400 N/A 4 in N/A 4.820 in N/A 304 Stainless Steel
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1