Item # 431 0054, Nylobrade® Push-On Thermoplastic Hose (PVC) On Dunham Rubber & Belting Corp.

Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com

Print Back

A blend of nitrile rubber and PVC reinforced with polyester
Specially designed for use with push-on style fittings without the need of clamps
Non-marking cover, resistant to U.V., ozone, and abrasion
Electrically non-conductive
Offers cold temperature flexibility
Silicone free - use as air hose in paint applications
Lighter weight and more abrasion resistant than all-rubber, push-on style hose
Available with brightly colored covers

Notes

NYLOBRADE PUSH-ON may be used up to 200 psi at 70ºF.more

Unit of Measure

Specifications | Physical Properties

Specifications

I.D.	N/A 1/4 in
O.D.	N/A 0.500 in
Wall	N/A 0.125 in
Working Pressure at 70ºF	N/A 200 psi
Bend Radius	N/A 2.50 in
Weight/100 ft.	N/A 8 lbs
Standard Coil Length	N/A 100 ft

Physical Properties

Hardness, Shore A	N/A 75
Tensile Strength	N/A 1800 psi
Ultimate Elongation	N/A 350 %
100% Modulus of Elasticity	N/A 1200 %
Brittle Temperature	N/A -35 ºF
Max. Operating Temp. When Used With Clamps	N/A 150 ºF
Notes	N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Cut coils are available; charges apply.