Sanitary Clamps
sanitary-clamps-2
Single Pin Squeeze Clamps
(6) Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures. /Asset/Single-pin-squeeze-clamp.jpg Single Pin Heavy Duty Clamps
(17) Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures. /Asset/sing-pin-hvy-dty-w-cross-ho.jpg Double Pin Heavy Duty Clamps
(6) Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures. /Asset/double-pin-heavy-duty-clamp.jpg 3 Segment Clamps
(6) Features:- Wing nut should be tightened to 25 in. lb. torque
Bolted Clamps
(10) Features:- Nuts should be tightened to 20 ft. lbs torque
T-Bolt Clamps (Sanitary)
(9) Features:- 1" - 3" nuts tightened to 20 in. lb. of torque
- 4" nut tightened to 30 in. lb. of torque
- 6" nut tightened to 40 in. lb. of torque
- 8" - 12" nuts tightened to 50 in. lb. of torque
- All nuts are brass
