Easy Splitting of Conveyor Belts

The Ply 130™ is used to separate between the plies of a conveyor belt. This cutting action is often required in preparation before splicing a belt with a splice press. A great advantage of this ply separator is that it can split as deep as 5" (130 mm) in one action. This is especially helpful when splitting very thin belts or belts where the material is difficult to cut, like with thin polyurethane belts. There are 2 models - one for workbench use (PLY 130 WB) and one with a stand (PLY 130 SA).

Capable of Splitting a Variety of Thermoplastic Belts

The robust construction of the Ply 130™ allows for precise splitting of thermoplastic belts - both thin and thick. As little as 0.02" (0.5 mm) can be separated - allowing for users to create film from the belt used in the vulcanizing process.

Easy Operation - One handle determines the splitting position.

Easy Depth Adjustment - Adjustable guide with ruler.

Excellent Repeatability - Achieve perfect results time after time.

Robust Machinery - Durable components and construction.


Easy operation - Multiple separations

The Ply 130™ can be used to prepare finger over linger splices and stepped splices. With only one handle you determine the depth you want to split the belt. It is possible to split between every layer of the belt and in this way generate two or three separations within one belt.
Unit of Measure

Specifications

Type

N/A Floor Stand Model

Item Code

N/A 08049

NEMA Plug

N/A L16-20

Voltage

N/A 460V/3Ph

Frequency

N/A 60 Hz

Splitting Depth

N/A 1.5 to 5.1 in40 to 130 mm

Belt Thickness Above Cut

N/A 0.02 to 0.3 in0.5 to 8 mm

Belt Thickness Below Cut

N/A 0.02 to 0.2 in0.5 to 5 mm

Maximum Belt Thickness

N/A 4 in10 mm

Minimum Tool Dimensions

N/A 22 x 17 x17 in550 x 420 x 420 mm

Maximum Tool Dimensions

N/A 43 x 23 x 19 in1100 x 580 x 470 mm

Tool Weight

N/A 97 to 143 lbs55 to 65 kg