Easy Splitting of Conveyor Belts
The Ply 130™ is used to separate between the plies of a conveyor belt. This cutting action is often required in preparation before splicing a belt with a splice press. A great advantage of this ply separator is that it can split as deep as 5" (130 mm) in one action. This is especially helpful when splitting very thin belts or belts where the material is difficult to cut, like with thin polyurethane belts. There are 2 models - one for workbench use (PLY 130 WB) and one with a stand (PLY 130 SA).
Capable of Splitting a Variety of Thermoplastic Belts
The robust construction of the Ply 130™ allows for precise splitting of thermoplastic belts - both thin and thick. As little as 0.02" (0.5 mm) can be separated - allowing for users to create film from the belt used in the vulcanizing process.
Easy Operation - One handle determines the splitting position.
Easy Depth Adjustment - Adjustable guide with ruler.
Excellent Repeatability - Achieve perfect results time after time.
Robust Machinery - Durable components and construction.
Easy operation - Multiple separations
The Ply 130™ can be used to prepare finger over linger splices and stepped splices. With only one handle you determine the depth you want to split the belt. It is possible to split between every layer of the belt and in this way generate two or three separations within one belt.
The Ply 130™ is used to separate between the plies of a conveyor belt. This cutting action is often required in preparation before splicing a belt with a splice press. A great advantage of this ply separator is that it can split as deep as 5" (130 mm) in one action. This is especially helpful when splitting very thin belts or belts where the material is difficult to cut, like with thin polyurethane belts. There are 2 models - one for workbench use (PLY 130 WB) and one with a stand (PLY 130 SA).
Capable of Splitting a Variety of Thermoplastic Belts
The robust construction of the Ply 130™ allows for precise splitting of thermoplastic belts - both thin and thick. As little as 0.02" (0.5 mm) can be separated - allowing for users to create film from the belt used in the vulcanizing process.
Easy Operation - One handle determines the splitting position.
Easy Depth Adjustment - Adjustable guide with ruler.
Excellent Repeatability - Achieve perfect results time after time.
Robust Machinery - Durable components and construction.
Easy operation - Multiple separations
The Ply 130™ can be used to prepare finger over linger splices and stepped splices. With only one handle you determine the depth you want to split the belt. It is possible to split between every layer of the belt and in this way generate two or three separations within one belt.
Unit of Measure
Specifications
Type |
N/A Work Bench Model |
Item Code |
N/A 08046 |
NEMA Plug |
N/A No Plug |
Voltage |
N/A 230V/3Ph |
Frequency |
N/A 60 Hz |
Splitting Depth |
N/A 1.5 to 5.1 in40 to 130 mm |
Belt Thickness Above Cut |
N/A 0.02 to 0.3 in0.5 to 8 mm |
Belt Thickness Below Cut |
N/A 0.02 to 0.2 in0.5 to 5 mm |
Maximum Belt Thickness |
N/A 4 in10 mm |
Minimum Tool Dimensions |
N/A 22 x 17 x17 in550 x 420 x 420 mm |
Maximum Tool Dimensions |
N/A 43 x 23 x 19 in1100 x 580 x 470 mm |
Tool Weight |
N/A 97 to 143 lbs55 to 65 kg |
