When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators. King safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Thoroughly tested with years of service. A positive safeguard for air hose connections - helps you meet today's safety standards. King safety cable must be installed in the extended position (no slack).

Features:
  • Hose-to-hose or hose-to-rigid outlet
  • King cable is the low cost answer to eliminate injuries caused by broken air hose connections
  • Highly resistant to rust and corrosion
  • No tools needed - easy to install and remove
  • Maximum working pressure: 200 PSI
Note: Cables are shipped with safety restraint labels attached. Labels are not pictured.

Safety Alert: Boss couplings and the steam quick disconnects are the only Dixon couplers recommended for steam service
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Item #

Style

Hose ID

Cable

Length

Material

WB1SS N/A W (Hose to Hose) N/A 1/2 to 1-1/4 in N/A 1/8 in N/A 20-1/4 in N/A Stainless Steel
WSR1SS N/A WSR (Hose to Tool) N/A 1/2 to 1-1/4 in N/A 1/8 in N/A 20-1/4 in N/A Stainless Steel
WB1 N/A W (Hose to Hose) N/A 1/2 to 1-1/4 in N/A 1/8 in N/A 20-1/4 in N/A Steel
WSR1 N/A WSR (Hose to Tool) N/A 1/2 to 1-1/4 in N/A 1/8 in N/A 20-1/4 in N/A Steel
WB3 N/A W (Hose to Hose) N/A 1/2 to 2 in N/A 3/16 in N/A 28 in N/A Steel
WSR3 N/A WSR (Hose to Tool) N/A 1/2 to 2 in N/A 3/16 in N/A 28 in N/A Steel
WA2SS N/A W (Hose to Hose) N/A 1-1/2 to 3 in N/A 1/4 in N/A 38-1/4 in N/A Stainless Steel
WA2 N/A W (Hose to Hose) N/A 1-1/2 to 3 in N/A 1/4 in N/A 38-1/4 in N/A Steel
WSR2 N/A WSR (Hose to Tool) N/A 1-1/2 to 3 in N/A 1/4 in N/A 38 in N/A Steel
WSR2SS N/A WSR (Hose to Tool) N/A 1-1/2 to 3 in N/A 1/4 in N/A 38 in N/A Stainless Steel
WA4 N/A W (Hose to Hose) N/A 4 in N/A 3/8 in N/A 44 in N/A Steel
WSR4 N/A WSR (Hose to Tool) N/A 4 in N/A 3/8 in N/A 44 in N/A Steel
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1