Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
Smooth Chemfluor® PTFE Fluoropolymer Smooth Inner Tube
304 Stainless Steel High Tensile Strength Braid

Features and Benefits
  • Greater wall thickness of Chemfluor® PTFE tube
    -Up lo 33% thicker than most competing products (tube wall .040 minimum)
    -Superior kink resistance
    -Improved vacuum ratings
    -Better damage resistance
  • Neutral to taste, color and odor
  • Non-stick, non-contaminating
  • Cleans easily -- steam, detergent or caustic
  • Can be autoclaved
  • Full ID sizes
    -Greater flow rate per given size
    -Less pressure drop through fitting area than hoses with tube size ID
Note:
Extended Service Life Tip:
All 3/4", 1", and 1-1/2" TS/TB/TD/TDB assemblies 36" and longer are strongly recommended to use full-length anti-kink casing to help prevent potential kinking and/or liner vacuum collapse
Unit of Measure

Specifications

Inside Diameter

 N/A 1/8 in3.2 mm

Outside Diameter

 N/A 1/4 in6.1 mm

Max. Length

 N/A 300 ft
Max. Working Pressure1 N/A 3000 psi20.69 MPa
Min. Burst Pressure2 N/A 15000 psi103.43 MPa

Min. Bend Radius

 N/A 1.50 in38.10 mm
Vacuum Hg (@ 70ºF)3 N/A 29.9 in75.95 mm

Weight

 N/A 0.05 lbs/ft0.07 kg/m

Applications

N/A

  • Sanitary transfer
  • Steam transfer core
  • Bottle filling
  • Gas analysis
  • Hydraulic lines
  • Extrusion presses
  • Molding/adhesive conveying

Common Media

N/A

  • Chemicals
  • Steam
  • Solvents
  • Inks and dyes
  • Paint
  • Injectable materials
  • Plastisols

Details

N/A TS Series Construction:

  • Inner Tube: White Chemfluor® PTFE
  • Cover: EPDM rubber
Reinforcement:
    -304 stainless steel braid
    -1-1/2" ID size double-braided for added kink resistance, higher pressure rating; working pressure based on minimum 4:1 safety factor burst to suggested maximum working pressure
Fittings:
  • PermaSeal® crimp-style
    -Over 40 styles in a wide range of materials
    -Standard: 316L stainless steel (wetted surfaces)

Engineering Specifications

N/A Temperature Rating

  • -100ºF to +450ºF continuous: 500ºF intermittent
  • -73ºC to +232ºC continuous; 260ºC intermittent

Industry Approvals & Compliances

N/A

  • FDA approved per 21CFR177.1550
  • US Pharmacopeia Class VI

Pressure Rating

N/A Burst Pressure at ambient 70ºF (21ºC). See applicable notes below on vacuum/pressure ratings at temperatures other than ambient.
Working Pressure is given @ 70ºF; Decrease working pressure 1% for every 2ºF above 350ºF
Vacuum Rating is given @ 70ºF; Decrease vacuum rating 1% for every 2ºF above 350ºF. 1-1/2" size (TD, TDB) vacuum rating decreases when installed less than 2X min. bend radius.
Extended Service Life Tip: All 3/4". 1". and 1-1/2" TS/TB/TD/TDB assemblies 36" and longer are strongly recommended to use full-length anti-kink casing to help prevent potential kinking and/or liner vacuum collapse.

  • 1 Working Pressure is given @ 70ºF; Decrease working pressure 1% for every 2ºF above 350ºF
  • 2 Burst Pressure at ambient 70ºF (21ºC). See applicable notes below on vacuum/pressure ratings at temperatures other than ambient.
  • 3 Vacuum Rating is given @ 70ºF; Decrease vacuum rating 1% for every 2ºF above 350ºF. 1-1/2" size (TD, TDB) vacuum rating decreases when installed less than 2X min. bend radius.