Print Back
Pharmaline is a unique, genuinely smoothbore PTFE-Lined hose product, based on a patented PTFE hose liner tube design. Pharmaline is designed to overcome the very poor flexibility of currently available similar smoothbore products. The only products which can match the flexibility of Pharmaline are convoluted PTFE lined hose products, sometimes misleadingly referred to as "smoothbore" or "smoothflex", even when the bore is actually convoluted.

APPLICATIONS

Pharmaline is designed for use in high purity Pharmaceutical, Biotech, Chemical and Foodstuffs application areas where ease of cleaning the hose is required, both internal and external. It is also very suitable for use in other general industrial applications, particularly those where hot fluids or gases are being passed, and if there is any risk of burns due to accidental touching of the hose - for example, hot oil or steam transfer applications.

ALTERNATIVE PRODUCTS

Pharmalex (leaflet available) is a lower pressure, lighter duty alternative to Pharmaline. Pharmalex is the same as Pharmaline, but without any wire braid, and with a transparent silicone Rubber cover.

HOSE TYPES, DESIGNS & APPROVALS

Pharmaline GP has a PTFE hose liner tube, manufactured from PTFE material in accordance with FDA requirement 21 CFR 177.1550.

An antistatic option is also available, Pharmaline AS, using liner material in accordance with the FDA requirement 21 CFR 178.3297.

Both Pharmaline GP and Pharmaline AS have been tested and the PTFE liners comply with USP Class VI, including the Elution (Cytotoxicity) test.

Both include grade 304 SS wire braid and a Platinum Cured white silicone rubber cover (Post-cured 4 hours at 200°C in accordance with requirements for USP Class VI). The Silicone Rubber material is in accordance with FDA requirement CFR-177-2600.

Alternative colors of the silicone rubber cover are also available, to special order. Clear, transparent silicone is one alternative, which is USP VI approved and permits inspection of the inner braid condition.

Pharmaline GP and AS are available in 1/4", 3/8", 1/2", 3/4" and 1" bore sizes. 

ADVANTAGES OVER CONVENTIONAL HOSE DESIGNS
  • Pharmaline can be used to replace silicone rubber hoses, particularly where the much better chemical resistance and ease of cleaning of the PTFE hose liner is an advantage.
  • Unlike silicone rubber hoses, Pharmaline can be steam sterilised any number of times, without degradation of the hose liner.
  • Pharmaline can be used to replace conventional smoothbore PTFE lined hoses in applications where the much better flexibility of Pharmaline is an advantage.
  • Pharmaline is smaller in O/D and lighter in weight than its nearest rival product because the construction does not include any glass fibre filler layers. The PTFE weight per unit length, however is higher.
PROPERTIES
  • Temperature Range: -60°c (-80°F) to +200°C (400°F).
  • Pressure vs Temperature - Pressure ratings are as listed up to 130°C (266°F), then reducing at 1% per 1°C (1.8°F) up to 200°C (400°F).
  • Vacuum - All sizes fully vacuum resistant up to 130°C.
END FITTINGS
  • Sanitary and Mini Sanitary Triclamp (Triclover) fittings in 316SS, with bores polished to <0.375µm (<15µ in) and electroplished.
  • I-Line Fittings.
  • Compression Fittings (Style 31 and 32).
  • BSPT and NPT Fixed Male Pipe Fittings.
  • Flanges, Camlocks, DIN 11851, RJT, SMS, RJP and others to special order.
IDENTIFICATION OPTIONS
  • Silicone encapsulated color coding, and / or text information to suit customers requirements.
  • 'Flotag' RFID chip, programmed to suit customers requirements.
  • Unique Serial Numbers and other information for each hose, stamped on ferrules or SS tags, to give total traceability.
Unit of Measure

Specifications

Hose Size

N/A 3/4 Inch

Actual Hose ID

N/A 0.75 Inch

O/D of Cover

N/A 1.07 Inch

Min. Bend Radius

N/A 2-1/2 Inch

Max. Working Pressure

N/A 900 psi

Burst Pressure

N/A 4715 psi

Weight

N/A 0.42 lbs/ft