Print Back
  • Silicone elastomer meets USP Class VI requirements
  • Manufactured under strict Good Manufacturing Practices (GMP) in a controlled environment
  • Platinum cured for the highest degree of purity (least extractables)
  • Reusable - will withstand repeated sterilization (If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.)
  • Nonreactive to body tissues and fluids
  • Applications include
more
Unit of Measure

Specifications

I.D.

3/8 in

O.D.

0.500 in

Wall

1/16 in

Standard Coil Length

50 ft

Physical Properties

Hardness, Shore A ±5

50

Tensile Strength

1100 psi

Elongation at Break

650 %

Modulus at 100 %

120 %

Tear Resistance, Die B

200 ppi

Temperature Range

-100 to 400 ºF-73.3 to 204.4 ºC

Compression Set

35 %

Notes

Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.