Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
  • Female cam and groove "D" type, swivel style
  • Full swivel design on the coupler-half
      -Allows positioning for easy leverage advantage to seal cam arms
  • Positive lock to the hose
      -Fitting design incorporates the dog-lock groove found in all Flexible Components fittings
      -Prevents fitting pull-off
  • Machined internal surfaces
      -Not a cast metal surface
      -Higher purity, larger ID for better flow rate, reduced entrapment
Materials
  • 316L stainless steel
  • Coupler is cast 316 stainless steel; insert is machined 316L stainless steel
  • Standard gasket material: Buna N rubber
Unit of Measure

Specifications

Type

 N/A Standard

Hose Size

 N/A 1.00 in25.40 mm

"I" Fitting Inner Diameter

 N/A 0.85 in21.59 mm

"D" Inside Dimension

 N/A 2.38 in60.45 mm

A Overall Length

 N/A 4.07 in103.38 mm

Standards

N/A

  • Manufactured to specification MIL-C-27487
  • All styles fully interchangeable with all other manufacturers' designs when made to this specification

Alternative Styles

N/A

  • Locking mechanism available to prevent accidental release of locking cam arms

Technical Data

N/A Recommended Operating Conditions

  • 1/2" - 2" - 250 MAWP (psi)
  • 2 - 1/2" and 3" - 150 MAWP (psi)
      -212ºF with Buna N gaskets
      -400ºF with Chemfluor® PFA encapsulated gaskets
  • Pressure ratings are for fittings only. When determining hose assembly maximum allowable working pressure, hose pressure ratings at temperature must be considered. Use the lower of the two ratings as the hose assembly MAWP.
  • Locking style available: replace SKS with SLKS in part number