Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
  • Made from non-toxic ingredients conforming to FDA standards
  • Does not impart a taste or odor to critical streams
  • Flexible, lightweight, durable
  • Translucent natural or opaque colors
  • Made from 100% virgin grade raw materials
  • Good dielectric properties
  • Offers enhanced resistance to stress cracking
  • Chemically inert; forms a good barrier to gases, vapors, and moisture
Notes

ZELITE conforms to the applicable regulations of the FDA for use of articles intended for contact with food. The increased tensile strength of ZELITE Linear Low Density, over that of a low density polyethylene, enhances its resistance to splitting during use.

FEP-lined polyethylene, offering superior purity at a very reasonable cost, is available through minimum order. Medium-high and ultra-high density polyethylene material is available through minimum order. Medium-high and ultra high density polyethylene material is available through minimum order.
Unit of Measure

Specifications

I.D.

 N/A 1.5 in

O.D.

 N/A 1-3/4 in

Wall

 N/A 0.125 in

Color

 N/A Natural

Standard Coil Length

 N/A 50 ft

Working Pressure at 70ºF

 N/A 50 psi

Burst Pressure at 70ºF

 N/A 200 psi

Weight/100 ft.

 N/A 25.5 lbs

Physical Properties

Hardness, Shore D ±5

 N/A 50

Tensile Strength

 N/A 2250 psi

Elongation at Break

 N/A 200-400 %

Brittle Temperature

 N/A -76 ºF

Vicat Softening Point

 N/A 196 ºF

Max. Operating Temp.

 N/A 140 ºF

Notes

 N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.