Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
Annular Construction
MSS4/CF04 (304 Series)
MSS6/CF16 (316L Series)

Features & Benefits
  • Wide temperature range -460ºF (-273ºC) to +1500ºF (+816ºC)
  • High quality and excellent workmanship to meet the rigorous demands of extremes in service at competitive prices with quick deliveries
      -Machined bar stock end fittings; designed to mate with hose for proper weld techniques
      -Double-pass welding (TIG)
      -Custom fabrication available to meet customer specifications
  • More corrugations per foot
  • Greater flexibility than competing products of similar size
  • Low force to bend; easier to install and disconnect
      -Flex-life extended
  • Compensates for misalignment, facilitates movements/thermal expansion
      -Braid coverage engineered to contain the inner core under pressure and reduce possibility of squirm
  • Absorbs vibration and deadens noise in rigid systems
  • Vacuum tight
  • Handles high pressures
  • Corrosion resistant
  • Non-aging/non-flammable
All braid reinforcement is 304 stainless steel.
Unit of Measure

Specifications

Inside Diameter

 N/A 2.00 in50.8 mm

Outside Diameter

 N/A 2.72 in69.1 mm

Max. Operating Pressure

 N/A 525 psi3.62 MPa

Max. Test Pressure

 N/A 1050 psi7.24 MPa

Min. Burst Pressure

 N/A 2100 psi14.46 MPa

Static Bend Radius

 N/A 4.50 in114.30 mm

Dynamic Bend Radius

 N/A 12.00 in304.80 mm

Weight

 N/A 2.37 lbs/ft3.53 kg/m

Material

 N/A 304 Stainless Steel

Applications

N/A

  • Steam lines (high pressure applications over +450ºF/+232ºC)
  • Cryogenic transfer
  • Conveying lines (cryogenic fluids, chemical transfer of liquids, gases and vapors)

Common Media

N/A

  • Steam
  • Liquified gas

Details

N/A Construction:

  • Inner metal hose:
      -Annular corrugated close pitch hose
      -Profile: parallel corrugations, omega shape close pitch
      -Made from butt-welded tubing
  • Reinforcement: Polypropylene braid
      -Each strand of large diameter (denier) polypropylene monofilament is twisted and subsequently twined prior to braiding
      -Tested for maximum abrasion and chemical resistance
Fittings:
  • Any style using butt weld construction (TIG method)
      -NPT FNTP. flange. J.I.C. compression, union, vacuum, sanitary, O-ring, BSP. metric and DIN

Industry Approvals & Compliances

N/A

  • To industry standards

Pressure Rating

N/A Pressure range 3250 psig to 185 psig operating pressure, depending on inside diameter and operating temperature (see Temperature Correction Chart below). Operating pressures based on 4:1 safety factor; operating pressure x 4 = rated minimum burst pressure at 70ºF (21ºC).

Product Designation Codes
MDS6 - 316 stainless steel double braid
MSS6 - 316 stainless steel
MSS4 - 304 stainless steel
CF16 - 316 stainless steel
CF04 - 304 stainless steel

All braid reinforcement is 304 stainless steel.
Consult factory for availability of larger sizes and inner cores of other alloys.
Metal hose is rated for full vacuum.

Specifying the Proper Metal Hose

N/A A number of factors should be taken into consideration when specifying 316L/304 Stainless Steel Metal Hose.

Material to be transferred

  • Select 316L or 304 stainless steel inner core, depending on the type of medium.
Corrosion potential
  • The corrosive nature of both the medium to be conveyed and the outside environment should be taken into account; the corrosive effects of many chemicals can be accelerated by higher temperatures.
  • If the material to be transferred is gaseous, flow rates should be specified, especially if velocity is to approach or exceed 180 feet per second.
  • Are the fittings to be of the same material?
Inside diameter (ID) of hose

Relationship of pressure rating, temperature and type of service
  • Operating pressures listed in the accompanying specifications chart (above) reflect a rating based on one braid reinforcement and a minimum safety ratio of 4:1. burst pressure to rated operation pressure.
  • Ratings are based on operating at ambient temperature 70ºF (21ºC). If your application exceeds this temperature, consult the temperature correction chart to calculate the adjusted pressure rating at your particular operation temperature.
Maximum service temperature
  • 316L stainless steel: +1500ºF (+815ºC)
  • 304 stainless steel: +850ºF (+454ºC)