Print Back
  • Swivel flange, lap-joint style
Materials
  • Flange insert (stub end): 316L stainless steel - Polypropylene or PVDF (Kynar®) available on special order
  • Flange: epoxy coated steel, 316 or 304 stainless steel, PVDF (Kynar®), polypropylene or PVC; consult factory for availability
PermaSeal® Flange Fittings

PermaSeal flange fittings feature a 316L stainless steel machined stub end, which is far more durable and corrosion resistant than industry standard 304 stainless steel. Thanks to the unique swivel design of the stub end and the fact that the flange "backs up" the stub end and is no in direct contact with corrosive media (as is common with fixed flange designs), the user has the option to choose less costly epoxy-coated carbon steel or low cost plastic flanges.

The machined stub end has an extremely smooth internal surface finish that surpasses the quality normally found with some "as cast" or "mill finish" stainless steel stub ends. In fact, Flexible Components' stainless steel stub ends are machined to Type A Schedule 40 or thicker standards.
Unit of Measure

Specifications

Hose Size

N/A 4.00 in101.6 mm

Fitting Inner Diameter

N/A 3.75 in95.25 mm

Flange Outer Diameter

N/A 9.00 in228.60 mm

"D" Flare Dimensions

N/A 6.18 in156.97 mm

"A" Overall Length

N/A Consult Factory

Standards

N/A

  • ANSI B16.5
  • ASTM A.182
  • Optional:
      -DIN P/N 16
      -BS 10 table E
      -BS4504
      -J.I.S. and other various international specifications

Alternative Styles

N/A

  • Can be supplied with different materials in the wetted surface area; consult factory.

Technical Data

N/A

  • Unique swivel design of stub end allows use of less costly epoxy-coated carbon steel or low cost plastic flanges
    - Because the flange "backs up" the stub end and is not in direct contact with corrosive media (as is common with fixed flange designs)
  • Machined stub end has an extremely smooth internal surface finish that surpasses the quality normally found with some "as cast" or "mill finish" stainless steel stub ends
    - Flexible Components' stainless steel stub ends are machined to Type A Schedule 40 or thicker standards

PermaSeal Nominal Flange Dimensions

N/A