Unit of Measure
Specifications
Tube Size |
N/A 1.12 in |
Type |
N/A Standard |
Gasket Material |
N/A BUNA-N (Standard) |
Sleeve Material |
N/A Stainless Steel |
| Dimension E1 | N/A 4.50 in |
Allowable Misalignment |
N/A ±2º per end |
| Gasket Temperature Rating2 | N/A Oils -25ºF to +212ºF (-32ºC to +100ºC) Water -25ºF to +180ºF (-32ºC to +82ºC) |
| Pressure Rating3 | N/A 2.07 MPa 300 psi |
Vacuum Rating |
N/A 1.79 bar 25 in. Hg |
Notes |
N/A Stainless Steel (Sleeve only - consult Eaton for availability) |
- 1 Straight, Double-Bulged joints are available in longer lengths than "E" shown in increments of 1 inch. "E" dimension is minimum length for longer joints.
-
2 Maximum temperature ratings are meant as a guide only.
For extreme temperature conditions, consult factory. - 3 Warning: The Flexmaster joint is designed to seal pipe and tube connections. The Flexmaster joint is not intended to hold piping systems together. Normal hangers, guides, anchors and other external piping restraints must be used to restrain the piping or tubing system from movement.
