Print Back
  • Chemically inert; low permeability
  • Manufactured from FDA-sanctioned ingredients for use with food contact surfaces
  • Lowest coefficient of friction of any solid material
  • Widest service temperature of any plastic tubing (-275ºF to 500ºF)
  • Excellent electrical and weathering properties; non-flammable
  • Made without plasticizer which can leach into critical streams
  • Ultra-high-purity grades available for the semiconductor industry.
Notes

Almost totally inert, FLUOROPOLYMER tubing can be used withmore
Unit of Measure

Specifications

Material

FEP

I.D.

1.5 in

O.D.

1-5/8 in

Wall

0.063 in
Standard Coil Length1 10 ft Straight 5 ft Straight

Notes

Limited stock item; lead times and minimums apply.
PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages.

Physical Properties

Hardness, Shore D

55

Tensile Strength

3500 psi

Elongation at Break

300 %

Brittle Temperature

<-400 ºF

Max. Continuous Operating Temp.

400 ºF

Notes

Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
  • 1 Sold by standard coil length only.