Products

A new formulation of TPE (thermoplastic elastomer) tubing has been developed for fluid transfer in the biopharmaceutical industry: AdvantaFlex.

AdvantaFlex addresses the need for a flexible, translucent, sterilizable, moldable, heat sealable, and weldable biopharmaceutical tubing for fluid processing. AdvantaFlex maintains its physical properties following sterilization processes, resists kinking, remains translucent for visible product flow, and does not become gummy. Additionally, the unique properties of AdvantaFlex help it outperform similar tubing in peristaltic pumps.

Key Features

• Excellent life in peristaltic pumps
• Sterile weldable and heat sealable
• Now available as leak - proof molded connections and tubing
• Made from FDA-approved ingredients
• Excellent low absorption and adsorption characteristics as compared to silicone
• Meets various ISO and USP standards, including Class VI
• Meets European Pharmacopoeia 3.2.2.1 standards
• Low permeability as compared to silicone
• Certified free of silicone oils and animal-derived ingredients
• Smooth interior for excellent flow and performance
• Sterilizable by gamma radiation or autoclave
• Translucent for fluid flow visibility
• Excellent tubing component for single-use systems
• Sizes from 1/8" (0.125) through 1" (1.000) I.D.
• Custom lengths, sizes, and packaging available
• Sealed in polybags at manufacture for cleanliness
• Documented quality control; lot traceable with identification on polybags
• Single resin validation - no need to graft to other tubing materials like silicone for media filling and sampling applications that involves peristaltic pumps; helps eliminate operator errors
• Chemical Characterization of Materials per ISO - "Extractables" test portfolio available

Low volatile grade, platinum-cured silicone tubing manufactured and packaged in a Class 7 (Class 10,000) ISO-certified clean room for critical pharmaceutical, biomedical, cosmetic, and food applications. APST has been put through extensive physical, chemical, and biological testing, and meets USP Class VI, FDA CFR 177.2600, ISO 10993, NSF 51, European Pharmacopoeia 3.1.9, and 3A standards.

APST Unreinforced Silicone Tubing is not intended for implantation, continuous steam applications, or elevated pressure levels.

Key Features

• Hardness value of 50 Shore A
• Extremely flexible
• General temperature range: -100º F (-73.3º C) to 400º F (204.4º C)
• Sterilizable by autoclave or gamma radiation
• Low volatile grade suitable for pharmaceutical and biomedical applications
• Certified by the National Sanitation Foundation for food equipment materials (NSF-51)
• Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure
• Imparts no taste or odor to critical streams
• Stocked in 25 ft., 50 ft., and 100 ft. coils
• Manufactured and packaged in a Class 7 (Class 10,000) ISO-certified clean room
• Documented lot traceable with identification on bags
• Documented quality control
• Complete validation package available upon request
• Custom lengths, sizes, and packaging available upon request

Low volatile grade, platinum-cured silicone hose manufactured and packaged in a Class 7 (Class 10,000) ISO-certified clean room for critical pharmaceutical, biomedical, cosmetic, and food applications. Polyester yarn braiding inside the wall enhances the pressure capabilities. APSH has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9, and 3A standards.

APSH Braid-Reinforced Silicone Hose is not intended for implantation and is not to be used for continuous steam applications.

Key Features

Hardness value of 65 Shore A (validatable core: 70A; cover: 60A)

• Extremely flexible
• General temperature range: -100º F (-73.3º C) to 400º F (204.4º C)
• Sterilizable by autoclave, CIP, SIP, and gamma radiation processes
• Low volatile grade suitable for pharmaceutical and biomedical applications
• Core made of silicone certified by the National Sanitation Foundation for food equipment materials (NSF-51)
• Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure
• Imparts no taste or odor to critical streams
• Stocked in 25 and 50 ft. coils
• Manufactured and packaged in a Class 7 (Class 10,000) ISO-certified clean room
• Documented lot traceable with identification on bags
• Documented quality control
• Complete validation package available upon request
• Color tracer braid available for easy identification
• Custom lengths, sizes, special cleaning, and/or packaging available

Offered as an alternative to mandrel-built wrapped silicone hose, APSH-DB provides several advantages over wrapped hose. APSH-DB, an extruded product, is less costly than wrapped hose and is available in lengths up to 50 feet. It offers more flexibility and comparable working pressure ratings. APSH-DB meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9, NSF 51, and 3A standards.

APSH-DB Double Braid-Reinforced Silicone Hose is not intended for implantation and is not to be used for continuous steam applications.

Key Features

• Extremely flexible with excellent bend radii
• Less costly than wrapped-style silicone hose
• General temperature range: -100ºF (-73.3ºC) to 400ºF (204.4ºC)
• Sterilizable/autoclavable
• Low volatile grade suitable for pharmaceutical and biomedical applications
• Core made of silicone certified by the National Sanitation Foundation for food equipment materials (NSF-51)
• Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure
• Imparts no taste or odor to critical streams
• Stocked in 25 and 50 ft. coils
• Shore A hardness values: validatable core: 70A; center jacket: 70A; outer cover: 60A
• Provided with white-colored outer silicone for a neat, clean appearance
• Manufactured and packaged in a Class 7 (Class 10,000) ISO-certified clean room
• Documented lot traceable with identification on bags
• Documented quality control
• Complete validation package available upon request
• Custom lengths, color coding, 316L stainless steel sanitary fittings, hose assemblies, and/or packaging available

Low volatile grade, platinum-cured silicone hose for critical pharmaceutical, biomedical, cosmetic, and food applications, comprises the core of APSM. The core is then slipped onto a mandrel and wrapped with polyester mesh fabric and additional silicone. It is cured into a homogeneous hose to enhance its pressure capabilities, making it ideal for discharge applications. APSM has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9, and 3-A standards.

APSM is not intended for implantation and is not to be used for continuous steam applications.

Key Features

• Low volatile grade silicone suitable for pharmaceutical, biomedical, cosmetic, and food applications
• Core made of silicone certified by the National Sanitation Foundation for food equipment materials (NSF-51)
• Hardness value of 70 Shore A
• Durable and heavy duty, yet flexible
• General temperature range: -100ºF (-73.3ºC) to 400ºF (204.4ºC)
• Sterilizable by autoclave, CIP, SIP, and gamma radiation processes
• Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure
• Imparts no taste or odor to critical streams
• Stocked in 12 ft. straight lengths
• Documented lot traceable with identification on bags
• Documented quality control
• Complete validation package available upon request
• Custom lengths, sizes, colors, special cleaning, and/or packaging available (lead times and minimum order quantities may apply)

Platinum-Cured; Polyester Mesh Fabric; Smooth or Convoluted O.D.

Low volatile grade, platinum-cured silicone hose, for critical pharmaceutical, biomedical, cosmetic, and food applications, comprises the core of APSW. The core is then slipped onto a mandrel and wrapped with polyester mesh fabric, 316 stainless steel reinforcing wire, and additional silicone. It is cured into a homogeneous hose to enhance its pressure and vacuum capabilities. APSW has been put through extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9, and 3-A standards.

APSW is not intended for implantation and is not to be used for continuous steam applications.

Key Features

• Available with either a smooth or convoluted O.D.
• Low volatile grade silicone suitable for pharmaceutical, biomedical, cosmetic, and food applications such as ultrapure water transfer, food processing, washdown stations, skid systems, and other suction and discharge uses
• Core made of silicone certified by the National Sanitation Foundation for food equipment materials (NSF-51)
• Hardness value of 70 Shore A
• Rated for full vacuum
• Crush and kink resistant
• Durable and heavy-duty yet translucent for visual flow contact
• Two styles available: Smooth O.D. or, for an improved range of flexibility, Convoluted
• General temperature range: -100ºF (-73.3ºC) to 400ºF (204.4ºC)
• Sterilizable by autoclave, CIP, SIP, and gamma radiation processes
• Resists temperature extremes, chemical attack, ozone, radiation, moisture, and environmental exposure
• Imparts no taste or odor to critical streams
• Stocked in 12 ft. straight lengths
• Documented lot traceable with identification on bags
• Documented quality control
• Complete validation package available upon request
• Custom lengths, sizes, colors, special cleaning, and/or packaging available (lead times and minimum order quantities may apply)

White PTFE or Black Conductive PTFE Core; Smooth or Convoluted I.D.

Stainless steel braided PTFE hose is constructed of virgin material with a series 300 stainless steel wire braid reinforcement jacket. The fluoropolymer core is inert and offers long flexural life, low permeability, non-flammability, and the lowest coefficient of friction of any solid material. The stainless steel braid permits higher pressure uses, reduces the possibility of kinking, and generally protects the core. Optional silicone jacketing offers protection from high temperatures during handling and keeps the outer surface clean and smooth.

Key Features

• True I.D. PTFE Smooth Core offers maximum flow; Convoluted Core offers excellent flow with enhanced flexibility
• Stock sizes for True I.D. Smooth Core: 1/4 in. through 1-1/2 in.; Convoluted Core: 1/2 in. through 4 in.
• General temperature range: -65ºF (-53.9ºC) to 450ºF (232.2ºC)
• Imparts no taste or odor to critical streams
• Easily cleaned or sterilized by autoclave, steam, or detergent
• Optional silicone jacketing makes stainless steel reinforced hose easier to handle by offering heat protection
• Silicone jacketing also provides a smooth outer surface to eliminate particle entrapment for sanitary conditions
• Full line of crimp fittings offered
• Custom lengths, sizes, other overbraiding materials, special cleaning, and/or packaging is available
• Custom crimped-on or flare-through assemblies offered
• Add stainless steel armor casing or cuffs for an extra layer of protection from crushing, kinking, harsh environments, and abrasion while still allowing flexibility
• Laser-etched stainless steel collars for hose identification available

Premium-quality hose for elevated pressure and temperature applications in the pharmaceutical, food, and beverage processing industries is available from AdvantaPure. APEWF is specially engineered to handle a wide range of fluids and chemicals.

APEWF is reinforced with a wire helix, making it suitable for suction or discharge applications. The hose offers flexibility and a smooth, sanitary inner surface for unrestricted flow for uses such as washdown stations, coolant transfer, glycol lines, and others.

Key Features

• Excellent chemical resistance properties make this hose ideal for many demanding applications
• Designed for suction or discharge applications
• Helical wire reinforcement helps withstand a higher level of internal pressures and maintain stated vacuum ratings
• Sanitary, smooth, white EPDM rubber core resists bacteria build-up and complies with FDA standards for use in food and beverage applications such as wine and beer, potable water, and fruit juices
• Odorless and tasteless core - fluids remain pure
• Handles a more extreme range of working temperatures than standard EPDM hoses
• Offers improved flexibility over similar fluoropolymer hoses
• Ideal for handling CIP solutions; may also be steam sterilized up to 302ºF (150ºC) for a maximum of 30 minutes
• Custom designed hose construction for flexibility - easily handles bends, turns, corners
• Abrasion-resistant smooth rubber cover
• Sizes range from 3/4 in. (19 mm) up to 4 in. I.D. (102 mm)
• Full line of crimp fittings and custom assemblies offered
• Add stainless steel armor casing or cuffs for an extra layer of protection from crushing, kinking, and harsh environments while still allowing flexibility
• Laser-etched stainless steel collars for quick, visual hose identification available
• Hose Track™ RF Identification and Lifecycle Analysis System available - RFID tags uniquely identify individual hose assemblies, create audit trails, and track key wear-related events

Made of virgin grade FEP fluoropolymer, APFRC is overbraided with a tightly-woven fabric and double spiral steel wire to dramatically enhance it's pressure-carrying capability. It's extremely smooth core offers excellent chemical resistance and is USP Class VI approved. An outer jacket of EPDM rubber provides enhanced durability and seals the hose against dirt, chemicals, or other external damage.

APFRC is now available in a more flexible version. APFRC-W-FLX offers the same physical properties as the original version, however, a noticeable difference is seen in larger I.D. sizes in tight-fitting applications where added flexibility is required.

Key Features

• Offers a smooth, non-stick interior for unrestricted fluid flow
• FEP core is USP Class VI approved and complies with FDA and USDA standards
• Resistant to kinking and chafing
• Rated for either pressure or full vacuum (29.9 in./Hg.) applications
• General temperature range: -40ºF (-40ºC) to 300ºF (148ºC)
• Sterilizable/autoclavable (maximum internal steam temperature: 300ºF at 50 psi)
• APFRC is not to be used for continuous steam applications
• Outer rubber jacket resists rot, ozone, radiation, and environmental exposure
• The FEP core imparts no taste or odor to critical streams
• Long lengths available - up to 100 ft. (30.5 m)
• Documented lot traceable
• Documented quality control
• Full line of 316L stainless steel sanitary fittings meeting 3-A standards and ASME/BPE specifications available; hose assemblies available through local authorized AdvantaPure fabricating distributors
• Add stainless steel armor casing or cuffs for an extra layer of protection from crushing, kinking, harsh environments, and abrasion while still allowing flexibility
• Custom lengths, sizes, white covered hose, private branding, and/or packaging available upon request