Dunham Rubber & Belting Corporation
682 Commerce Parkway West Dr.
Greenwood, IN 46143
Toll-free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com • Website: www.dunhamrubber.com
All Categories > Industrial Hose and Fittings > Industrial Hose Fittings, Couplings & Clamps > Sanitary Fittings > Saint Gobain Flexible Components & Sanitary Fittings > 90º Elbow - Full Size & Mini (Style 10L & Style 11L) > Item # 383210LSK  


Item # 383210LSK, 90º Elbow - Full Size & Mini (Style 10L & Style 11L)
List Price QUOTE

  • 90º sanitary elbows in mini and sanitary clamp styles
  • Sanitary connection matches hose barb size
Materials
  • 316L stainless steel
Surface Finish
  • Average 15 Ra or better





Specifications  · Standards  · Alternative Styles  · Technical Data

Specifications

Type
Full Size Elbow

Hose Size
2.00 in
50.80 mm

"A" Centerline Fitting End
8.02 in
203.58 mm

"B" Centerline to Face
3.50 in
88.90 mm

"C" Wall Thickness
0.07 in
1.65 mm

"D" Fitting Outer Dia.
2.49 in
63.25 mm


Standards
  • To industrial standards
  • Gasket face dimensions are standard to industry specifications


Alternative Styles
  • 1/2" and 3/4" are mini style (straight sizes only)
  • 1" through 4" sanitary clamp style (straight sizes only, no "step up" sizes available)
  • Standard in 90º elbow configurations (45º elbows available by special order)
  • Electropolished version available


Technical Data
  • Reduces strain on hoses by eliminating 90º hose configuration
  • Eliminates entrapment, reduces connection points and potential bacteria growth areas
  • Smaller installed dimensional envelope
Temperature/Pressure Ratings
  • Pressure and temperature ratings of Flexible Components' sanitary assemblies are dependent on clamp pressure and gasket material ratings
  • Clamps:
    -Standard weight style: 150
    PSIG @ 70ºF (21ºC): 125
    PSIG @ 250ºF (121ºC)
    -Heavyweight style: 500
    PSIG @ 70ºF (21ºC): 125
    PSIG @ 250ºF (121ºC)
    -High pressure bolt style:
    1500 PSIG 70ºF (21ºC);
    125 PSIG @ 250ºF (121ºC)
  • Gaskets:
    -Above 250ºF (121ºC). PTFE, Viton® or silicone gaskets are recommended