Dunham Rubber & Belting Corporation
682 Commerce Parkway West Dr.
Greenwood, IN 46143
Toll-free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.comWebsite: www.dunhamrubber.com
All Categories > Sanitary Hose and Fittings > High Purity Tubing, Hose & Fittings > FDA & Process Tubing > Zelite™ Linear Low Density Polyethylene Tubing > Item # 251 0256  


Item # 251 0256, Zelite™ Linear Low Density Polyethylene Tubing

List Price QUOTE

  • Made from non-toxic ingredients conforming to FDA standards
  • Does not impart a taste or odor to critical streams
  • Flexible, lightweight, durable
  • Translucent natural or opaque colors
  • Made from 100% virgin grade raw materials
  • Good dielectric properties
  • Offers enhanced resistance to stress cracking
  • Chemically inert; forms a good barrier to gases, vapors, and moisture
Notes

ZELITE conforms to the applicable regulations of the FDA for use of articles intended for contact with food. The increased tensile strength of ZELITE Linear Low Density, over that of a low density polyethylene, enhances its resistance to splitting during use.

FEP-lined polyethylene, offering superior purity at a very reasonable cost, is available through minimum order. Medium-high and ultra-high density polyethylene material is available through minimum order. Medium-high and ultra high density polyethylene material is available through minimum order.






Specifications  · Physical Properties

Specifications

I.D.

0.125 in

O.D.

0.250 in

Wall

1/16 in

Color

Natural

Standard Coil Length

100 ft

Working Pressure at 70ºF

180 psi

Burst Pressure at 70ºF

720 psi

Weight/100 ft.

1.47 lbs


Physical Properties

Hardness, Shore D ±5

50

Tensile Strength

2250 psi

Elongation at Break

200-400 %

Brittle Temperature

-76 ºF

Vicat Softening Point

196 ºF

Max. Operating Temp.

140 ºF

Notes

Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.