Tensile Force for 8% Elongation (k8% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
0.9 N/mm 5 lbs/in
Tensile Force for 8% Elongation after Relaxation (k8 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
0.6 N/mm 3 lbs/in
Min. Continuous Operating Temperature Admissible
-30 ºC -22 ºF
Max. Continuous Operating Temperature Admissible
60 ºC 140 ºF
Coefficient of Friction of Driving Pulley of Steel
0.7
Seamless Manufacturing Width
1200 mm 47 in
Product Designation
Product Group
Hamid Machine Tapes
Main Industry Segments
Paper converting Paper printing and finishing Postal/mail sorting
Belt Applications
Machine tape
Special Features
Abrasion resistant on both sides Constant and gentle positive grip Dimensionally stable Elastic
Mode of Use/Conveyance
Declined Horizontal Inclined Twists with short center distance Vertical
Product Construction/Design
Conveying Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side (Surface)
Rough structure
Conveying Side (Property)
Adhesive
Conveying Side (Color)
Green
Traction Layer (Material)
Hamid
Number of Fabrics
0
Running Side/Pulley Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Running Side/Pulley Side (Surface)
Rough Structure
Running Side/Pulley Side Property
Adhesive
Running Side/Pulley Side (Color)
Black
Product Characteristics
Slider Bed Suitable
No
Carrying Rollers Suitable
No
Troughed Installation Suitable
No
Antistatically Equipped
Yes
Additional Technical Information
Chemical Resistance Class
2 (These indications are not guarantees of properties)
Installation and Handling Instructions
Elastic belt: Initial elongation depends on belt load and application.; initial elongation between 3 to 8% is recommended.
Limitations
Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.
Notes
All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
