Tensile Force for 1% Elongation (k1% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
8.5 N/mm 49 lbs/in
Tensile Force for 1% Elongation after Relaxation (k1 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
2.6 N/mm 15 lbs/in
Min. Continuous Operating Temperature Admissible
-20 ºC -4 ºF
Max. Continuous Operating Temperature Admissible
100 ºC 212 ºF
Coefficient of Friction of Driving Pulley of Steel
0.15
Seamless Manufacturing Width
1200 mm 47 in
Product Designation
Product Group
Polyamide Machine Tapes
Main Industry Segments
Paper manufacturing and processing
Belt Applications
Machine tape
Special Features
Abrasion resistant Constant coefficient of friction Constant grip and release property Forgiving in case of short term shock like overloads
Mode of Use/Conveyance
Declined Horizontal Inclined Twists with short center distance Vertical
Product Construction/Design
Conveying Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side (Surface)
Rough structure
Conveying Side (Property)
Adhesive
Conveying Side (Color)
Green
Traction Layer (Material)
Polyamide (PA)
Number of Fabrics
2
Running Side/Pulley Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Running Side/Pulley Side (Surface)
Impregnated fabric
Running Side/Pulley Side Property
Non-adhesive
Running Side/Pulley Side (Color)
Green
Product Characteristics
Slider Bed Suitable
Yes
Carrying Rollers Suitable
Yes
Troughed Installation Suitable
No
Antistatically Equipped
Yes
Additional Technical Information
Chemical Resistance Class
2 (These indications are not guarantees of properties)
Installation and Handling Instructions
Do not go below initial elongation (epsilon) ~ 0.5%.; Install the slack belt and tension until running perfectly under the full belt load.
Limitations
Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.
Notes
All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
