Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
A new formulation of TPE (thermoplastic elastomer) tubing has been developed for fluid transfer in the biopharmaceutical industry: AdvantaFlex.

AdvantaFlex addresses the need for a flexible, translucent, sterilizable, moldable, heat sealable, and weldable biopharmaceutical tubing for fluid processing. AdvantaFlex maintains its physical properties following sterilization processes, resists kinking, remains translucent for visible product flow, and does not become gummy. Additionally, the unique properties of AdvantaFlex help it outperform similar tubing in peristaltic pumps.

Key Features
  • Excellent life in peristaltic pumps
  • Sterile weldable and heat sealable
  • Now available as leak - proof molded connections and tubing
  • Made from FDA-approved ingredients
  • Excellent low absorption and adsorption characteristics as compared to silicone
  • Meets various ISO and USP standards, including Class VI
  • Meets European Pharmacopoeia 3.2.2.1 standards
  • Low permeability as compared to silicone
  • Certified free of silicone oils and animal-derived ingredients
  • Smooth interior for excellent flow and performance
  • Sterilizable by gamma radiation or autoclave
  • Translucent for fluid flow visibility
  • Excellent tubing component for single-use systems
  • Sizes from 1/8" (0.125) through 1" (1.000) I.D.
  • Custom lengths, sizes, and packaging available
  • Sealed in polybags at manufacture for cleanliness
  • Documented quality control; lot traceable with identification on polybags
  • Single resin validation - no need to graft to other tubing materials like silicone for media filling and sampling applications that involves peristaltic pumps; helps eliminate operator errors
  • Chemical Characterization of Materials per ISO - "Extractables" test portfolio available
Unit of Measure

Specifications

I.D.

 N/A 1/4 in6.35 mm

Wall

 N/A 0.094 in2.38 mm

O.D.

 N/A 0.438 in11.11 mm

Working Pressure @ 70ºF (21.1ºC)

 N/A 23 psi1.6 bar

Length

 N/A 50 ft

Notes

 N/A Sold by standard coil length; longer standard lengths, such as 100 feet, are available on most sizes. Coils are supplied in heat-sealed polybags and bulk packed.

The data listed throughout this web site is meant only as a guide to aid in design, and is believed to be reliable; however, nothing stated shall constitute a guarantee or warranty for any application. Product field-testing should be performed to find the actual values for a specific application.

Physical Properties

Specific Gravity

 N/A 0.89

Durometer, Shore A ±5

 N/A 65

Ultimate Tensile Strength

 N/A 2167 psi

Ultimate Elongation

 N/A 948 %

Tensile Modulus @ 100%

 N/A 364 psi

Tear Strength, Die B

 N/A 350 ppi

Compression Set, Method B, 22 Hours @ 23ºC at 25% Deflection

 N/A 9.9 %

Max. Operating Temp.

 N/A 275 ºF

Brittle Temperature

 N/A -88 ºF