|
|
Item # 270AT, Tool for Push-On Fittings
|
|
List Price QUOTE
|
|
|
|
Features:- Cuts push-on style hose and inserts the fitting.
- Built-in cutter slices through 1/4" - 3/4" ID reinforced push-on hose without fraying.
- Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
- Tool has four 7/16" diameter mounting holes for bench mounting
- Overall size is 13-1/2" long x 2-3/8" wide x 7" height.
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Safety Alert: Boss couplings and the steam quick disconnects are the only Dixon couplers recommended for steam service
|
|
|
|
|
|
|
|
Assembly Instructions:Trim hose end with smooth square cutLubricate either push-on fitting, hose or both.Insert push-on fitting into hose until first barb is in hose.Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Disassembly Instructions:
Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
