Print Back
Polyamide folder-gluer belts
The design and production of Habasit's Folder-gluer belts is based on many years' experience in polyamide and fabric traction-layer products. The belts fulfill all the requirements of the newest processes in box folding. Habasit's "Flexproof adhesive free method of joining means reliable joints can be effected quickly by relatively untrained personnel with the belt remaining on the machine throughout the joining process.
The joint zone and belt are totally
more
Unit of Measure

Technical Data

Thickness

6.0 mm0.24 in

Mass of Belt (Belt Weight)

7.1 kg/m²1.45 lbs/ft²

Min. Pulley Diameter with Counter Flection

60 mm2.4 in

Tensile Force for 1% Elongation (k1 % after running in) per unit of Width (Habasit Standard SOP3-013)

7.5 N/mm43 lbs/in

Min. Continuous Operating Temperature Admissible

0 ºC32 ºF

Max. Continuous Operating Temperature Admissible

60 ºC140 ºF

Seamless Manufacturing Width

1200 mm47 in

Product Designation

Product Group

Polyamide Folder-Gluer Belts

Product Sub-Group

S Polyamide Folder-Gluer Belts

Main Industry Segments

Box making/folder gluer Paper manufacturing

Belt Applications

Folder-gluer belt Tubewinder belt

Special Features

Constant coefficient of friction Constant grip and release property Forgiving in case of short term shock like overloads

Mode of Use/Conveyance

Declined Horizontal Inclined Twists with short center distance Vertical

Product Construction/Design

Conveying Side (Material)

Acrylonitrile-Butadiene-Rubber (NBR)

Conveying Side (Surface)

Rough structure

Conveying Side (Property)

Adhesive

Conveying Side (Color)

Light green

Traction Layer (Material)

Polyamide (PA)

Number of Fabrics

2

Running Side/Pulley Side (Material)

Acrylonitrile-Butadiene-Rubber (NBR)

Running Side/Pulley Side (Surface)

Rough Structure

Running Side/Pulley Side Property

Adhesive

Running Side/Pulley Side (Color)

Yellow

Product Characteristics

Slider Bed Suitable

No

Carrying Rollers Suitable

Yes

Troughed Installation Suitable

No

Additional Technical Information

Chemical Resistance Class

2 (These indications are not guarantees of properties)

Installation and Handling Instructions

Do not go below initial elongation (epsilon) ~ 0.5%.; Install the slack belt and tension until running perfectly under the full belt load.

Limitations

dmin >=70mm in case belt speed > 200m/min; Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.

Notes

N/A All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.