Polyamide folder-gluer belts The design and production of Habasit's Folder-gluer belts is based on many years' experience in polyamide and fabric traction-layer products. The belts fulfill all the requirements of the newest processes in box folding. Habasit's "Flexproof adhesive free method of joining means reliable joints can be effected quickly by relatively untrained personnel with the belt remaining on the machine throughout the joining process. The joint zone and belt are totally homogeneous. The belts are covered with the same NBR layers as the Polyamide folder-gluer belts. The result, flexible, abrasion resistant products, easy to fit and "best in class performance"
Polyester folder-gluer belts The design and production of Habasit's Folder-gluer belts is based on many years' experience in polyester and fabric traction-layer products. The belts fulfill all the requirements of the newest processes in box folding.
Tensile Force for 1% Elongation (k1 % after running in) per unit of Width (Habasit Standard SOP3-013)
7 N/mm 40 lbs/in
Min. Continuous Operating Temperature Admissible
-20 ºC -4 ºF
Max. Continuous Operating Temperature Admissible
65 ºC 149 ºF
Seamless Manufacturing Width
1200 mm 47 in
Product Designation
Product Group
Polyamide Folder-Gluer Belts
Product Sub-Group
Flexfold (CM-Folder-Gluer Belts)
Main Industry Segments
Box making/folder gluer Paper converting Paper manufacturing
Belt Applications
Folder-gluer belt Live roller drive belt
Special Features
Adhesive-free joint Constant coefficient of friction Dimensionally stable Longitudinal flexibility
Mode of Use/Conveyance
Declined Horizontal Inclined Vertical
Product Construction/Design
Conveying Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side (Surface)
Rough structure
Conveying Side (Property)
Adhesive
Conveying Side (Color)
Light green
Traction Layer (Material)
Polyamide (PA) fabric
Number of Fabrics
2
Running Side/Pulley Side (Material)
Acrylonitrile-Butadiene-Rubber (NBR)
Running Side/Pulley Side (Surface)
Rough Structure
Running Side/Pulley Side Property
Adhesive
Running Side/Pulley Side (Color)
Yellow
Product Characteristics
Slider Bed Suitable
No
Carrying Rollers Suitable
Yes
Troughed Installation Suitable
No
Additional Technical Information
Chemical Resistance Class
2 (These indications are not guarantees of properties)
Installation and Handling Instructions
Do not go below initial elongation (epsilon) ~ 0.5%.; Install the slack belt and tension until running perfectly under the full belt load.
Limitations
Belt speed must not exceed 300m/min; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.
Notes
All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
