Item # B45BY-R150, Y - Ball Check Valves On Dunham Rubber & Belting Corp.

When liquid flows through the valve, the ball is forced into the branch of the valve allowing full fluid flow. When the liquid stops, equalizing the pressure, the ball drops back into the seat, preventing backflow. Should reverse flow occur, the differential pressure will cause the ball to seal firmly against the seat preventing leakage.

Features:

Maximum operating pressure: 250 PSI
Maximum operating temperature: 250ºF
Two piece construction for easier alignment during installation
Various end configurations available: clamp, weld, I-line, Q-line, bevel seat and John Perry
Polished ID and OD to 3A standards
All metal contact surfaces of 316L stainless steel construction
Air blow check valve can be added (see air blow for sizing)
PTFE ball

Unit of Measure

Specifications

Size	N/A 1-1/2 in
Dimension A	N/A 7.500 in
Dimension B	N/A 3.3 in
Dimension C	N/A 1.365 in
Dimension D	N/A 1.875 in
Dimension E	N/A 1.984 in
Dimension F	N/A 2.516 in
Vertical Seating Pressure	N/A 3.6 psi
Material	N/A 316L Stainless Steel

Specifications

Size

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Dimension F

Vertical Seating Pressure

Material