The FD96 High Pressure Thread Together Flush Face Series is designed for high pressure and high impulse applications for hydraulic circuits. The FD96 design provides low connect and disconnect force in hydraulic circuits where trapped residual pressure must be addressed. The flush face design limits contamination and unwanted fluid loss. The FD96 Series is available in sizes 1/4" through 2" to best meet your specific size requirements.
Product Features
Product Features
- Thread together design allows connection and disconnection under pressure up to 4,300 psi
- Low connection force
- Dual flush-face valving with non-spill design
- Working pressures up to 8,500 psi
- Body material - High resistance carbon steel with zinc trivalent chromate plating and black oxide plating
Unit of Measure
Physical Characteristics
Size |
N/A 04 |
Max. Operating Pressure (Connected) |
N/A 600 bar8700 psi |
Max. Operating Pressure |
N/A 600 bar8700 psi |
Min. Burst Pressure (Connected) |
N/A 1500 bar21750 psi |
Min. Burst Pressure |
N/A 1500 bar21750 psi |
Rated Flow |
N/A 12 L/min3.2 gpm |
Fluid Loss |
N/A 0.012 cc |
Req. Torque to Connect |
N/A 29-37 lbs40-50 N |
Specifications
Coupling Type |
N/A Male |
Body Size |
N/A 1/4 in |
Port Size |
N/A 3/8 in |
Thread |
N/A 9/16-18 UNF |
Type |
N/A Female SAE O-ring |
Dimension A |
N/A 72.8 mm2.87 in |
Dimension B |
N/A 34.8 mm1.37 in |
Hex |
N/A 22 mm0.87 in |
Connected Length |
N/A 90.0 mm3.54 in |
Cap and Plug |
N/A
FD96-1010-04, Plugs & Caps for FD96 Series Flush Face PTC Couplings (QUOTE) |
