The FD96 High Pressure Thread Together Flush Face Series is designed for high pressure and high impulse applications for hydraulic circuits. The FD96 design provides low connect and disconnect force in hydraulic circuits where trapped residual pressure must be addressed. The flush face design limits contamination and unwanted fluid loss. The FD96 Series is available in sizes 1/4" through 2" to best meet your specific size requirements.
Product Features
Product Features
- Thread together design allows connection and disconnection under pressure up to 4,300 psi
- Low connection force
- Dual flush-face valving with non-spill design
- Working pressures up to 8,500 psi
- Body material - High resistance carbon steel with zinc trivalent chromate plating and black oxide plating
Unit of Measure
Physical Characteristics
Size |
N/A 20 |
Max. Operating Pressure (Connected) |
N/A 470 bar6800 psi |
Max. Operating Pressure |
N/A 300 bar4350 psi |
Min. Burst Pressure (Connected) |
N/A 1200 bar17400 psi |
Min. Burst Pressure |
N/A 800 bar11600 psi |
Rated Flow |
N/A 189 L/min50.1 gpm |
Fluid Loss |
N/A 0.060 cc |
Req. Torque to Connect |
N/A 92-107 lbs125-145 N |
Specifications
Coupling Type |
N/A Female |
Body Size |
N/A 1-1/4 in |
Port Size |
N/A 1 in |
Thread |
N/A 1-5/16-12 UN |
Type |
N/A Female SAE O-ring |
Dimension A |
N/A 105.8 mm4.17 in |
Dimension B |
N/A 69.8 mm2.75 in |
Hex |
N/A 55 mm2.17 in |
Cap and Plug |
N/A
FD96-1009-20, Plugs & Caps for FD96 Series Flush Face PTC Couplings (QUOTE) |
