Fittings & Accessories
all-categories-brewery-industry-fittings-1
Features:
B5101 Clamp End Butterfly Valve with Trigger Handle - [C]
(24) The stainless steel trigger handle offers twelve positions which make it easy to understand how to actuate the valve.Features:
- 100% tested / 100% inspected
- 100% pressure hydraulic tested for reliability
- Wetted surfaces polished to 3-A standards
- Various end configurations available: weld, I-line, Q-line, bevel seat and John Perry Actuation available: double-acting, air-to-spring, electric
- Vacuum rating: 14.2 PSI at 68ºF
- Temperature range: 15ºF to 200ºF
- Clamp style is standard
- Valves can be automated
- Lock-out, tag-out ready, 0.271 diameter hole
B5115 304 Stainless Steel Clamp End Butterfly Valve with Trigger Handle
(4)Features:
- 100% tested / 100% inspected
- All wetted surface are sanitary finish to <32Ra
- Field serviceable (no special tools required)
- Silicone seats
- Blue trigger handle
- Operating temperature range: 15°-200°F
- Maximum operating pressure: 110 psi
Compact Sight Glass
(5)Applications
Used widely in the food, dairy, and beverage sanitary processes to view products and fluids. This design is perfect for hoses.
Features
- Easier to clean than bolted styles
- Less cost to repair than bolted styles
- Clamp connections standard
- Maximum temperature: 200°F
- Maximum pressure: 100 PSI
Materials
- Body: 316L stainless steel
- Sight glass: Borosilicate glass
- Gasket: buna
Hot Water Washdown Spray Nozzle
Applications
- For low pressure cleaning, tank and drum cleaning and chemical manufacturing
Features
- Designed for operator comfort
- Variable spray pattern from conical spray to solid stream
- Hose connects at base of gun for easy maneuvering
- ½” female NPT inlet
- Rubber coated handle protects hands from water temperatures to 150°F
- Do not use with steam lines
Single Pin Squeeze Clamps
(6) Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures. /Asset/Single-pin-squeeze-clamp.jpg Single Pin Heavy Duty Clamps
(17) Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to the required torque (25 in. lbs.). Tests are done hydrostatically with no water hammer or shock loads. Please note the pressure ratings of the described unions are above the recommended pipe line operating pressures. /Asset/sing-pin-hvy-dty-w-cross-ho.jpg 