- Very low moisture absorption: 1.4% maximum (at 73ºF)
- Will not become brittle or swell because of water
- Nylon-11, semi-rigid grade, natural color made with FDA-approved ingredients for use with food contact surfaces
- Excellent resistance to flexural fatigue, tube vibration, and movement
- Lightweight with excellent bend radii and pressure ratings
- Resists crushing, abrasion, and cracking
- Standard availability in metric sizes and colors
- Tightest tolerances available
NYLOTUBE is resistant tomore
- Very low moisture absorption: 1.4% maximum (at 73ºF)
- Will not become brittle or swell because of water
- Nylon-11, semi-rigid grade, natural color made with FDA-approved ingredients for use with food contact surfaces
- Excellent resistance to flexural fatigue, tube vibration, and movement
- Lightweight with excellent bend radii and pressure ratings
- Resists crushing, abrasion, and cracking
- Standard availability in metric sizes and colors
- Tightest tolerances available
NYLOTUBE is resistant to solvents, alkalies, oils, greases, petroleum products, fungi, and molds. It has generally good resistance to dilute mineral and organic acids, but in- plant tests are suggested.
Semi-Rigid grade, black color, is heat and light stabilized.
Nylon brittleness is usually caused by cycles of water absorption and depletion. NYLOTUBE is not dependent on moisture for flexibility, so life expectancy is greatly increased with brittleness eliminated.
Tolerances
OD (INCH) | TOLERANCE (INCH) |
1/8 - 5/32 | +0.001, -0.003 |
3/16 - 5/8 | +0.001, -0.004 |
3/4 | +0.001, -0.005 |
1 | +0.001, -0.006 |
OD (MM) | TOLERANCE (MM) |
4 | +0.03, -0.08 |
6 - 12 | +0.03, -0.10 |
Unit of Measure
Specifications
I.D. |
N/A 6 mm |
O.D. |
N/A 8 mm |
Wall |
N/A 1 mm |
Color |
N/A Yellow |
Grade |
N/A Flexible |
Material |
N/A Nylon-12 |
Standard Coil Length |
N/A 100 ft |
Working Pressure at 70ºF |
N/A 315 psi |
Burst Pressure at 70ºF |
N/A 950 psi |
Bend Radius1 | N/A 33 mm |
Weight/100 ft. |
N/A 1.49 lbs |
Notes |
N/A Metric fittings are available from stock. |
Nylon-12 Physical Properties
Hardness, Shore D ±5 (Nylon-12) |
N/A 63 |
Tensile Strength (Nylon-12) |
N/A 7348 psi |
Elongation at Break (Nylon-12) |
N/A 300 % |
Brittle Temperature (Nylon-12) |
N/A <-90 ºF |
Max. Operating Temp. (Nylon-12) |
N/A 212 ºF |
Note (Nylon-12) |
N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. |
- 1 Use Only as guide.