- The Tru-Trainer idler has a patented internal pivot that is perpendicular to the plane of the belt. Since the surface of the belt remains in contact with the roller over the entire width of the belt, the training action is far more effective then the conventional style of training idlers. As the belt starts to move off-center it will contact the tapered section of the roller on that side of the belt. The effect of this will be to force the roller to pivot on its central pivot causing the belt to come back to its original position. Once the roller has steered the belt back to the center, the opposite side of the belt will contact the taper on the opposite ends of the idler and this will cause the idler to realign itself perpendicular to the belt.
- Continuous steering in both wet and dry conditions.
- Does not rely on the edge of the belt to activate the tracking mechanism(No 90 degree contact with the belt edge).
- Rubber covered for better tracking and self-cleaning.
- No external pivot to build up with carry-back.
- Sealed bearings equals no maintenance.
- Works on reversing belts.
Unit of Measure
