Request Information
Polyamide folder-gluer belts
The design and production of Habasit's Folder-gluer belts is based on many years' experience in polyamide and fabric traction-layer products. The belts fulfill all the requirements of the newest processes in box folding. Habasit's "Flexproof adhesive free method of joining means reliable joints can be effected quickly by relatively untrained personnel with the belt remaining on the machine throughout the joining process.
The joint zone and belt are totally homogeneous. The belts are covered with the same NBR layers as the Polyamide folder-gluer belts.
The result, flexible, abrasion resistant products, easy to fit and "best in class performance"

Polyester folder-gluer belts
The design and production of Habasit's Folder-gluer belts is based on many years' experience in polyester and fabric traction-layer products. The belts fulfill all the requirements of the newest processes in box folding.
Unit of Measure

Technical Data

Thickness

 N/A 3.0 mm0.12 in

Mass of Belt (Belt Weight)

 N/A 3.5 kg/m²0.72 lbs/ft²

Min. Pulley Diameter with Counter Flection

 N/A 30 mm1.2 in

Tensile Force for 1% Elongation (k1 % after running in) per unit of Width (Habasit Standard SOP3-013)

 N/A 5 N/mm29 lbs/in

Min. Continuous Operating Temperature Admissible

 N/A 0 ºC32 ºF

Max. Continuous Operating Temperature Admissible

 N/A 60 ºC140 ºF

Seamless Manufacturing Width

 N/A 1200 mm47 in

Product Designation

Product Group

 N/A Polyamide Folder-Gluer Belts

Product Sub-Group

 N/A S Polyamide Folder-Gluer Belts

Main Industry Segments

 N/A Box making/folder gluer Paper converting Paper manufacturing

Belt Applications

 N/A Folder-gluer belt

Special Features

 N/A Constant coefficient of friction Constant grip and release property Forgiving in case of short term shock like overloads

Mode of Use/Conveyance

 N/A Declined Horizontal Inclined Twists with short center distance Vertical

Product Construction/Design

Conveying Side (Material)

 N/A Acrylonitrile-Butadiene-Rubber (NBR)

Conveying Side (Surface)

 N/A Rough structure

Conveying Side (Property)

 N/A Adhesive

Conveying Side (Color)

 N/A Light green

Traction Layer (Material)

 N/A Polyamide (PA)

Number of Fabrics

 N/A 2

Running Side/Pulley Side (Material)

 N/A Acrylonitrile-Butadiene-Rubber (NBR)

Running Side/Pulley Side (Surface)

 N/A Rough Structure

Running Side/Pulley Side Property

 N/A Adhesive

Running Side/Pulley Side (Color)

 N/A Yellow

Product Characteristics

Slider Bed Suitable

 N/A No

Carrying Rollers Suitable

 N/A Yes

Troughed Installation Suitable

 N/A No

Additional Technical Information

Chemical Resistance Class

 N/A 2 (These indications are not guarantees of properties)

Installation and Handling Instructions

 N/A Do not go below initial elongation (epsilon) ~ 0.5%.; Install the slack belt and tension until running perfectly under the full belt load.

Limitations

 N/A dmin >=40mm in case belt speed > 300m/min; Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.

Notes

N/A All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.