Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
Unit of Measure

Specifications

Pipe Size

 N/A 0.38 in

Pipe O.D.

 N/A 0.675 in

Type

 N/A Standard

Gasket Material

 N/A EPDM

Sleeve Material

 N/A Plated Steel (Standard)
Dimension E1 N/A 2.00 in

Allowable Misalignment

 N/A ±4º per end
Gasket Temperature Rating2 N/A Water and water/glycol mixture +20ºF to +275ºF (+29ºC to +137ºC)
Pressure Rating3 N/A 2.07 MPa 300 psi

Vacuum Rating

 N/A 1.79 bar 25 in. Hg

Notes

 N/A Sleeve in this size is cylindrical (no-bulge). Allowable misalignment is ± 2º per end for this size.
  • 1 Straight, Double-Bulged joints are available in longer lengths than "E" shown in increments of 1 inch. Consult Eaton. "E" dimension is minimum length for longer joints.
  • 2 Maximum temperature ratings are meant as a guide only.
    For extreme temperature conditions, consult factory.
  • 3 Warning: The Flexmaster joint is designed to seal pipe and tube connections. The Flexmaster joint is not intended to hold piping systems together. Normal hangers, guides, anchors and other external piping restraints must be used to restrain the piping or tubing system from movement.