Request Information
Smooth OD and ID Chemfluor®
FEP Fluoropolymer Lined
EPDM Covered Flexible Hose

Features and Benefits
  • Ultra smooth OD surface
  • Easy to clean
  • Smooth ID when bent
  • Imparts no taste or odor
  • Excellent bend radius
  • Kink resistant
  • Sterilizable and autoclavable
  • Non-aging liner
  • Full vacuum rated
  • Super chemical resistant
Note:
Extended Service Life Tip:
Suggest using full-length anti-kink armor casing or at least 16" to 24" long anti-kink cuffs (see Hose Cover Options) at each fitting end to help reduce the strain on the crimp collar and fittings in high load installations. Prolonged service at elevated temperature will reduce total service life.
Unit of Measure

Specifications

Inside Diameter

 N/A 1.0 in25.4 mm

Outside Diameter

 N/A 1-1/2 in38.1 mm
Max. Working Pressure1 N/A 450 psi3.10 MPa
Min. Burst Pressure2 N/A 1800 psi12.41 MPa

Min. Bend Radius

 N/A 4.75 in120.65 mm
Vacuum Hg (@ 70ºF)3 N/A 29.9 in75.95 mm

Weight

 N/A 0.75 lbs/ft1.12 kg/m

Applications

N/A

  • Load cells
  • Skid transfer
  • Pumping stations/portable pumps
  • Vessel or tank transfer
  • Rail car loading/unloading
  • Transfer lines
  • CIP
  • Chemical process lines

Details

N/A Construction:

  • Inner Tube: Chemfluor® FEP
  • Cover EPDM rubber cover
Reinforcement:
    -Multiple polyester plycord and EPDM rubber
    -Double helix, high tensile strength carbon steel wire
Colors:
    -Light grey with a white layline in grey lettering
    -Other colors are available as special orders. Minimum quantity required. Consult for details
Fittings:
  • PermaSeal® Crimp Style Fittings
    -Over 40 styles of crimp-style fittings in a wide range of materials
  • Flare-Thru Fittings
    -Available in Sanitary Clamp style, Flange style and locking or non-locking swivel female cam-lock styles

Engineering Specifications

N/A Temperature Rating

  • -40ºF to +350ºF
  • -40ºC to +177ºC

Industry Approvals & Compliances

N/A

  • FDA approved per 21CFR177.1550
  • US Pharmacopeia Class VI

Pressure Rating

N/A Note: Weights and outside diameter dimensions are nominal. End fitting vs. hose pressure limitations must be considered and the lower of the two ratings must be used on assemblies.
Burst Pressure ratings at ambient 70ºF (21ºC). See applicable notes below on vacuum/pressure ratings at temperatures other than ambient
Working Pressure is given @ 70ºF; Decrease working pressure 1% for every 2ºF above 212ºF
Vacuum Rating is given @ 70ºF; Decrease vacuum rating 1% for every 2ºF above 212ºF. For 1-1/4" and larger sizes, vacuum rating decreases when installed less than 2X min. Bend radius.
Flare-Thru fittings are pressure rated. Not rated for vacuum service
Extended Service Life Tip: Suggest using full-length anti-kink armor casing or at least 16" to 24" long anti-kink cuffs (see Hose Cover Options) at each fitting end to help reduce the strain on the crimp collar and fittings in high load installations. Prolonged service at elevated temperature will reduce total service life.

PharmaSmooth Physical Properties




If left blank, you will receive standard light gray for the jacket color.

  • 1 Working Pressure is given @ 70ºF; Decrease working pressure 1% for every 2ºF above 212ºF.
  • 2 Burst Pressure ratings at ambient 70ºF (21ºC). See applicable notes below on vacuum/pressure ratings at temperatures other than ambient.
  • 3 Vacuum Rating is given @ 70ºF; Decrease vacuum rating 1% for every 2ºF above 212ºF. For 1-1/4" and larger sizes, vacuum rating decreases when installed less than 2X min. Bend radius.