Print Back
Unit of Measure

Technical Data

Thickness

N/A 1.6 mm0.06 in

Mass of Belt (Belt Weight)

N/A 1.6 kg/m²0.33 lbs/ft²

Min. Pulley Diameter with Counter Flection

N/A 15 mm0.6 in

Tensile Force for 8% Elongation (k8% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)

N/A 3.2 N/mm18 lbs/in

Tensile Force for 8% Elongation after Relaxation (k8 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)

N/A 2.2 N/mm13 lbs/in

Min. Continuous Operating Temperature Admissible

N/A -30 ºC-22 ºF

Max. Continuous Operating Temperature Admissible

N/A 60 ºC140 ºF

Coefficient of Friction of Driving Pulley of Steel

N/A 0.7

Seamless Manufacturing Width

N/A 1200 mm47 in

Product Designation

Product Group

N/A Hamid Machine Tapes

Main Industry Segments

N/A Paper converting Paper printing and finishing Postal/mail sorting

Belt Applications

N/A Machine tape

Special Features

N/A Abrasion resistant on both sides Constant and gentle positive grip Dimensionally stable Elastic

Mode of Use/Conveyance

N/A Declined Horizontal Inclined Twists with short center distance Vertical

Product Construction/Design

Conveying Side (Material)

N/A Acrylonitrile-Butadiene-Rubber (NBR)

Conveying Side (Surface)

N/A Fine structure

Conveying Side (Property)

N/A Adhesive

Conveying Side (Color)

N/A Green (Habasit green)

Traction Layer (Material)

N/A Hamid

Number of Fabrics

N/A 0

Running Side/Pulley Side (Material)

N/A Acrylonitrile-Butadiene-Rubber (NBR)

Running Side/Pulley Side (Surface)

N/A Rough textile structure

Running Side/Pulley Side Property

N/A Adhesive

Running Side/Pulley Side (Color)

N/A Black

Product Characteristics

Slider Bed Suitable

N/A No

Carrying Rollers Suitable

N/A Yes

Troughed Installation Suitable

N/A No

Antistatically Equipped

N/A Yes

Additional Technical Information

Chemical Resistance Class

N/A 2 (These indications are not guarantees of properties)

Installation and Handling Instructions

N/A Elastic belt: Initial elongation depends on belt load and application.; initial elongation between 3 to 8% is recommended.

Limitations

N/A Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.

Notes

N/A All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.