Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
    The FD86 is a thread together steel coupling offering dry break and high impulse technology and capabilities. The maximum operating pressure is 5,000 psi.
  • Tubular valve and sleeve construction for low fluid loss and air inclusion.
  • Thread together design using wing or hex nut allows connection and disconnection against pressures up to 750 psi.
  • Teflon® back uop rings along with secondary metal-to-metal sealing contact provides high impulse capability up to 5,000 psi operating pressure.
  • Acme threads prevent galling and provide ease of connection.
  • Metal-to-metal sealing withstands +2000ºF for ten minutes with no fluid loss (requirement in California for oil field blow-out preventers).
  • Steel flange available for bulkhead mounting.
  • Standard seal material - Buna-N.
  • Standard body material - Zinc plated steel.
  • Teflon is a registered trademark of Dupont.
Unit of Measure

Specifications

Coupling Size

 N/A -20

Thread Size (P)

 N/A 1-1/4 to 11-1/2

A

 N/A 5.62

B

 N/A 3.40

Dim.- Hex(1)

 N/A 2.00 inches

Seal Material

 N/A EPR

Type

 N/A Female Half - Female NPTF/With Hex Nut