Print Back
    The FD90 Series Diagnostic coupling is designed to connect and disconnect pressure gauges to hydraulic systems, eliminating the need for permanent gauges. The maximum operating pressure is 7,000 psi.
  • Automatic sleeve for one hand push-to-connect operation.
  • Flush face valving provides minimal fluid loss and low air inclusion.
  • Self-sealing valve design allows connection and disconnection at 500 psi.
  • Broad range of end configurations for system accessibility.
  • Standard seal material - Buna-N.
  • Standard body material - Zinc plated steel.
FD90 Series SAE J1502 Interchange
Unit of Measure
Items FD90 SERIES PIC 1
FD90-1034-02-04
FD90 Series/ SAE J1502 Interchange
FD90 SERIES PIC 1
FD90-1035-02-04
FD90 Series/ SAE J1502 Interchange
FD90 SERIES PIC 1
FD90-1034-04-04
FD90 Series/ SAE J1502 Interchange
FD90 SERIES PIC 1
FD90-1035-04-04
FD90 Series/ SAE J1502 Interchange
FD90 SERIES PIC 2
FD90-1044-03-04
FD90 Series/ SAE J1502 Interchange
Coupling Size N/A -04
Thread Size (P) N/A 1/8-27 N/A 1/8-27 N/A 1/4-18 N/A 1/4-18 N/A 3/8-24
A N/A 1.70 N/A 1.70 N/A 1.90 N/A 1.90 N/A 1.52
B N/A
Dim.- Hex(1) N/A .62 inches N/A .62 inches N/A .75 inches N/A .75 inches N/A .62 inches
Seal Material N/A BUNA-N N/A BUNA-N W/DUST CAP N/A BUNA-N N/A BUNA-N W/DUST CAP N/A BUNA-N
Type N/A MALE HALF FEMALE PIPE/VALVED N/A MALE HALF FEMALE PIPE/VALVED N/A MALE HALF FEMALE PIPE/VALVED N/A MALE HALF FEMALE PIPE/VALVED N/A MALE HALF MALE SAE O-RING/VALVED