Print Back
  • Chemically inert; low permeability
  • Manufactured from FDA-sanctioned ingredients for use with food contact surfaces
  • Lowest coefficient of friction of any solid material
  • Widest service temperature of any plastic tubing (-275ºF to 500ºF)
  • Excellent electrical and weathering properties; non-flammable
  • Made without plasticizer which can leach into critical streams
  • Ultra-high-purity grades available for the semiconductor industry.
Notes

Almost totally inert, FLUOROPOLYMER tubing can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals.

FLUOROPOLYMER tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method.

FLUOROPOLYMER’s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance.

PTFE’s translucent white color will vary naturally from lot to lot, however the quality and physical properties do not change. FEP and PFA are clearer and can be heat sealed and heat bonded.

Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylene-jacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through minimum order.

What is it?

PTFE (Polytetrafluoroethylene)
resin is supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. It is translucent white in color.

FEP (Fluorinated Ethylene Propylene) resin is pelletized for its hot-melt extrusion process and is a clear tubing.

PFA (Perfluoroalkoxy) resin is also a pelletized product which is hot melt extruded. It, too, is clear.
Fluoropolymer Tubing (PTFE, FEP & PFA)
Unit of Measure
Items Fluoropolymer Tubing (PTFE, FEP & PFA)
300 0074
Fluoropolymer Tubing (PTFE, FEP & PFA)
Fluoropolymer Tubing (PTFE, FEP & PFA)
300 0151
Fluoropolymer Tubing (PTFE, FEP & PFA)
Fluoropolymer Tubing (PTFE, FEP & PFA)
300 0228
Fluoropolymer Tubing (PTFE, FEP & PFA)
Fluoropolymer Tubing (PTFE, FEP & PFA)
300 0305
Fluoropolymer Tubing (PTFE, FEP & PFA)
Fluoropolymer Tubing (PTFE, FEP & PFA)
300 0382
Fluoropolymer Tubing (PTFE, FEP & PFA)
Material N/A PTFE
I.D. N/A 1/32 in N/A 1/32 in N/A 1/16 in N/A 1/16 in N/A 3/32 in
O.D. N/A 1/16 in N/A 3/32 in N/A 0.125 in N/A 3/16 in N/A 5/32 in
Wall N/A 0.015 in N/A 0.030 in N/A 0.030 in N/A 0.063 in N/A 0.030 in
Working Pressure at 70ºF N/A N/A 389 psi N/A 295 psi N/A 393 psi N/A 238 psi
Burst Pressure at 70ºF N/A N/A 1962 psi N/A 1487 psi N/A 1983 psi N/A 1197 psi
Standard Coil Length1 N/A 100 ft N/A 100 ft N/A 100 ft50 ft N/A 100 ft50 ft N/A 100 ft50 ft
Notes N/A Limited stock item; lead times and minimums apply.
PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages.
N/A PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages. N/A PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages. N/A PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages. N/A PTFE is coiled in single-section 25 ft. packages, maximum two-section 50 ft. packages, or maximum three-section 100 ft. packages. All FEP and PFA lengths are supplied in single-section packages.
  • 1 Sold by standard coil length only.