Internal hose: Synthetic rubber, extruded whole without joints, of uniform thickness.

Reinforcement: 4 high tensile steel wire spirals up to size 1”, 6-spirals from size 1 ¼”.

Covering: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions.

Recommended fluid: Petroleum-based hydraulic fluids (mineral oils), glycol-water based, water, lubricants.

Operating temperature: -40°F to +250°F (-40°C to +121°C) Continuous; -40°F to +257°F (-40°C to +125°C) Intermittent; -40°F to +158°F (-40°C to +70°C) for water based fluids; +32°F to +158°F (0°C to +70°C) for water.

Applications: Construction, Marine & Offshore, Industrial Hydraulics, Jet Grouting, Mining & Drilling, Earth Moving

Type Approval: MSHA, ABS

Applicable Specs: EXCEEDS EN 856 SAE 100R13 – ISO 3862 R13

Isobaric pressure rating 350 bar/5000 psi. Impulse tested up to 1,000,000 cycles.

Note: Approved for use with “X” Series One-Piece, No-Skive Fittings.

Unit of Measure

I.D.

N/A 1 in

Hose Size

N/A 16

O.D.

N/A 38.7 mm

Max. Working Pressure

N/A 5075 psi

Min. Burst Pressure

N/A 24070 psi

Min. Bend Radius

N/A 11.811 in

Weight

N/A 1.415 lbs/ft

Ferrule

N/A 0013-16