Silicone Tubing
silicone-tubing1
SILCON MED-X tubing is made under strict accordance with FDA Good Manufacturing Practices (GMP) and conforms to the biocompatibility requirements of USP Class VI.
SILCON MED-X’s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening.
Other sizes and 60A durometer material are also available.
SILCON MED-X is not recommended for implantable or in-body uses.
Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall.
SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use. /Asset/a4195.jpg
SILBRADE® Braid Reinforced Silicone Hose
(9)- Open mesh polyester braiding incorporated within the wall of silicone silicone tubing
- Made from FDA-sanctioned ingredients
- Translucent natural color for visual contact with the flow
- Able to resist extreme temperature variation: -80ºF to 350ºF
- Odorless, tasteless, and inert
- Excellent weatherability properties -- resists U.V., ozone, gases, moisture, and extreme temperatures
- Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing
- Listed by the National Sanitation Foundation (NSF 51)
SILCON®
(35)- Made from FDA-sanctioned ingredients
- Able to resist extreme temperature variation: -100°F to 500°F
- Translucent natural color for visual contact with the flow
- Resilient, stretchable, and resistant to compression set
- Odorless, tasteless, and inert
- Good electrical and weatherability properties - resists U.V., ozone, gases, and moisture
- Listed by the National Sanitation Foundation (NSF 51)
SILBRADE® MEDICAL
(7)- Open mesh polyester braiding incorporated within the wall of silicone tubing
- Silicone elastomer meets USP Class VI and NSF-51 requirements
- Translucent natural color for visual contact with the flow
- Able to resist extreme temperature variation: -80ºF to 350ºF
- Odorless, tasteless, and inert
- All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces
- Manufactured under strict Good Manufacturing Procedures in a controlled environment
SILCON® MEDICAL
(26)- Silicone elastomer meets USP Class VI and NSF-51 requirements
- Manufactured under strict Good Manufacturing Procedures in a controlled environment Reusable -- will withstand repeated sterilization
- Nonreactive to body tissues and fluids
- Translucent natural color for visual contact with the flow
- Odorless, tasteless, and inert
- All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces
- May be used in peristaltic pumps
APSPG Pump Grade Silicone Tubing
(10)Class VI, platinum-cured silicone elastomer comprises AdvantaPure’s new peristaltic pump grade silicone tubing. Ideally suited for pharmaceutical, biotech, and laboratory environments, APSPG is specially formulated to withstand repeated compression and release for consistent, dependable performance – far outlasts standard silicone tubing.
APSPG Pump Grade Silicone Tubing is not intended for implantation, continuous steam applications, or elevated pressure levels.
Key Features
- Special formulation promotes long life in pumps
- Extremely flexible and resilient; hardness value of 50 Shore A
- Outstanding compression characteristics
- Smooth surfaces offer uniform fluid flow, resistance to bacteria build-up, and consistent pump performance
- APSPG tubing is USP Class VI approved
- Material meets FDA 21 CFR 177.2600
- Low volatile grade suitable for pharmaceutical and biomedical applications
- Maximum operating temperature: 400°F (204.4°C); brittle temperature: less than -100°F (-73.3°C)
- Sterilizable/autoclavable
- Imparts no taste or odor to critical streams
- Translucent for visual contact with the flow
- Stocked in sizes from .031” through .500” I.D.
- Manufactured in a certified HEPA-filtered clean room
- Sealed in polybags at manufacture for cleanliness
- Documented lot traceable with identification on bags and boxes
- Documented quality control
- Custom lengths, sizes, and packaging available upon request
Silcon® Med-X Platinum-Cured Medical Grade Silicon Tubing
(19)- Silicone elastomer meets USP Class VI requirements
- Manufactured under strict Good Manufacturing Practices (GMP) in a controlled environment
- Platinum cured for the highest degree of purity (least extractables)
- Reusable - will withstand repeated sterilization (If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.)
- Nonreactive to body tissues and fluids
- Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling
SILCON MED-X tubing is made under strict accordance with FDA Good Manufacturing Practices (GMP) and conforms to the biocompatibility requirements of USP Class VI.
SILCON MED-X’s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening.
Other sizes and 60A durometer material are also available.
SILCON MED-X is not recommended for implantable or in-body uses.
Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall.
SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use. /Asset/a4195.jpg
