Master-Clip Neoprene
(27)Material
Hose wall: neoprene-coated polyester fabric
External helix: galvanized steel
Color: black
Temperature Range: -30°F up to +300°F, Intermittent to +350°F, when used in exhaust gas systems, gas funnels should be used properly and enough fresh air should be utilized
Applications
- Air-conditioning/ventilation systems
- Automotive industry
- Chemicals industry
- Engine manufacturing
- Exhaust gas extraction
- Suction of aggresive media
- Transport of hot or cold air
- Low pressure applications
Properties
- Flame-resistant to UL94, UL214 criteria
- Improved temperature resistance
- Good chemical resistance
- Highly flexible
- Extreme compressibility 1:6
- Small bend radius
- Vibration-proof
- External steel helix protects against abrasion
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Special diameters metric
Master-Clip Hypalon
(27)Material
Hose wall: HYPALON-coated polyester fabric
External helix: galvanized steel
Color: outside black, inside green
Temperature Range: -40°F up to +350°F, intermittent to +375°F
Applications
- Air-conditioning/ventilation systems
- Automotive industry
- Engine manufacturing
- Exhaust gas extraction
- Suction of aggressive media
- Transport of hot or cold air
- Granulate drying
- Suction plants
- Standard industrial hose
- Low pressure applications
Properties
- Flame-resistant
- Improved temperature resistance
- Excellent chemical resistance
- Highly flexible
- Extreme compressibility 1:6
- Small bend radius
- Vibration-proof
- Good UV/ozone resistance
- External steel helix protects against abrasion
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Electrical current filler wire
- Special diameters metric
Master-Clip Viton®
(27)Material
Hose wall: Viton-coated polyester fabric
External helix: galvanized steel
Color: red
Temperature Range: -15°F up to +410°F, intermittent to +465°F
Applications
- Chemical industry
- Extraction of corrosive aggressive media in medium temperature range
- Paint mist exhaustion
- Low pressure applications
Properties
- Excellent chemical resistance
- High temperature resistant
- Excellent UV/ozone resistance
- Highly flexible
- Extreme compressibility 1:6
- Small bend radius
- Vibration-proof
- Kink-proof
- Tear resistant
- Smooth inner wall
- External steel helix protects against abrasion
- Special clamping method guarantees high tensile strength between hose material and external helix
Available on Request
- Special colors
- Special lengths
- Custom design with other pitches and helix sizes
- Special diameters metric
Master-Clip ISO-Silicone
(27)Material
Hose wall: Two-layer construction, inner layer heat resistant impregnated glass fabric, outer layer silicone-coated glass fabric
External helix: galvanized steel
Color: silver
Temperature Range: -75°F up to +570°F, Intermittent to +625°F, when used in exhaust gas systems, gas funnels should be used properly and enough fresh air should be utilized
Applications
- Machine manufacturing
- Automotive manufacturing
- Low pressure applications
- Defense systems
- Aircraft manufacturing
- Engine manufacturing
- Hot and cold air conveyance
- Extractor units with greater suction performance
Properties
- Flame-resistant
- Very high temperature resistance
- Highly flexible
- Super lightweight
- Compressibility 1:4
- Small bend radius
- Good vacuum resistance
- Vibration-resistant
- External steel helix protects against abrasion
- Special clamping method guarantees high tensile strength between hose material and external helix
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Special diameters metric
Master-Clip CAR
(27)Material
Hose wall: special-coated high temperature fabric
External helix: galvanized steel
Color: outside green, inside black
Temperature Range: -75°F up to +570°F, intermittent to +660°F
Applications
- Machine manufacturing
- Automotive manufacturing
- Aircraft manufacturing
- Suction plants
- Fume exhaust (esp. Diesel engines)
- Defense systems
- General engineering
- Extractor units
- Hot air
- Smoke extractors
- Low pressure applications
Properties
- Flame-resistant
- Very good temperature resistance
- Vibration-proof
- High resistance to mechanical loads
- Highly flexible
- Compressibility 1:6
- Small bend radius
- Extremely lightweight
- Abrasion-resistant
- Primarily suitable as exhaust hose
- External steel helix protects against abrasion
- Special clamping method guarantees high tensile strength between hose material and external helix
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Double layer construction with raised vacuum resistance (up to 30% more than single layer standard hose types)
- Special diameters metric
Master-Clip HT 1000
(27)Material
Hose wall double layer
Inner wall: heat resistant impregnated glass fabric
Outer wall: special coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire
External helix: galvanized steel
Color: silver
Temperature Range: -5°F up to +1000°F, intermittent to +1100°F, small amounts of smoke may be given off when used under positive pressure or with low extraction rates
Applications
- Hot air
- Suction plants
- Furnace construction
- Iron and steel works
- Engine construction
- Radiant heat protection
- Primarily suited as extraction hose
- Low pressure applications
Properties
- Flame-resistant
- Very high temperature resistance
- Silicone-free
- Highly flexible
- Extreme compressibility 1:6
- Small bend radius
- Improved vacuum resistance by woven in reinforcement
- External steel helix protects against abrasion
- Suitable for continually flexing
- Special clamping method guarantees high tensile strength between hose material and external helix
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Special diameters metric
Master-SIL 1
(13)Material
Hose wall: single layer, silicon-coated glass fabric
Spiral: spring steel wire
Cord: glass fiber cord
Color: red
Temperature Range: -75°F up to +600°F
Applications
- Chemicals industry
- Automotive industry
- Aircraft manufacturing
- Conveyance of air and gaseous media with high nominal and ambient temperatures
- Hot air hose for granulate dryer
- Machine and engine manufacturing
- Shipbuilding
- Plastic processing industry
- Waste incineration plants
- General engineering
- Highly flexible
- Lightweight
- Small bend radius
- Symmetrical bending
- Kink-proof
- Good chemical resistance
- Immovable vulcanized wall and spring steel spiral
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
/Asset/Master-SIL-2-web.jpg
Master-SIL 2
(16)Material
Hose wall: silicon-coated glass fabric, double-layered
Spiral: spring steel wire
Cord: glass fiber cord
Color: red
Temperature Range: -75°F up to +600°F
Applications
- Chemicals industry
- Automotive industry
- Aircraft manufacturing
- Conveyance of air and gaseous media with high nominal and ambient temperatures with greater mechanical requirements
- Hot air hose for granulate dryer
- Machine and engine manufacturing
- Shipbuilding
- Plastic processing industry
- Waste incineration plants
- General engineering
- Highly flexible
- Lightweight
- Small bend radius
- Symmetrical bending
- Kink-proof
- Good chemical resistance
- Immovable vulcanized wall and spring steel spiral
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
Available on Request
- Special lengths
- Spliced lengths
- With spiral-free sleeves
/Asset/Master-SIL-2-web.jpg
Master-Sil 2 Nomex
(17)Material
Hose wall: inner layer silicon-coated glass fabric, outer layer silicone-coated Nomex
Spiral: spring steel wire
Cord: aramid cord
Color: red
Temperature Range: -75°F up to +600°F, intermittent to +660°F
When used in exhaust gas systems, gas funnels should be used properly and enough fresh air should be utilized
Applications
- Chemicals industry
- Automotive industry
- Aircraft manufacturing
- Conveyance of air and gaseous media with high nominal and ambient temperatures with greater mechanical requirements
- Hot air hose for granulate dryer
- Machine and engine manufacturing
- Shipbuilding
- Plastic processing industry
- Waste incineration plants
- General engineering
Properties
- Highly flexible
- Lightweight
- Small bend radius
- Symmetrical bending
- Kink-proof
- Good chemical resistance
- Immovable vulcanized wall and spring steel spiral
- Excellent flex fatigue resistance
- Excellent abrasion resistance
- Very durable
- Good tear and puncture resistance
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
- Special lengths
- Spliced lengths
- With spiral-free sleeves
Master-Clip SILICONE H
(25)Material
Hose wall: heavy silicone-coated glass fabric
External helix: galvanized steel
Color: silver-grey
Temperature Range: -75°F up to +570°F, intermittent to +625°F
When used in exhaust gas systems, gas funnels should be used properly and enough fresh air should be utilized
Applications
- Machine manufacturing
- Automotive manufacturing
- Defense systems
- Aircraft manufacturing
- Engine manufacturing
- General engineering
- Hot air conveyance
- Extractor units
- Higher vacuum applications
- Especially recommended for diesel applications due to heavier coating than Master-Clip Silicone
- Low pressure applications
Properties
- Flame-resistant
- Very high temperature resistaance
- Highly flexible
- Compressibility 1:6
- Small bend radius
- Vibration-resistant
- External steel helix protects against abrasion
- Special clamping method guarantees high tensile strength between hose material and external helix
- To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet
Available on Request
- Special lengths
- Custom design with other pitches and helix sizes
- External helix also in stainless steel
- Special diameters metric
FlexFlyte L-1 Ducting
Construction
Material: Two ply neoprene coated fiberglass
Color: Black
Temperature: -65°F to 300°F
Standard length: 12 feet
Applications
- Air
- Chemical fumes
- Dust
- Exhaust and Ventilation
- Temperature extremes
- Vacuum and suction
Industries
- Automotive
- Electronic equipment
- Electroplating
- Plastics
Features
- Cuffed ends
- Fume removal
- Hi-temp
- Self-extinguishing
- UL approved
Details
- Standard length of 3/4" is 10'
- Lightweight and flexible
- UL94V-0 listed
- Great for low pressure applications
- Handles air and fumes at low pressures and moderately high temperatures
- Not recommended for continuous flexing, liquids or abrasives
- Available as U-1 (one-ply) for lower pressure applications
- Non-standard lengths and cuffs available
FlexFlyte L-9 Ducting
(22)Construction
Material: Two-ply silicone coated fiberglass hose with a helically wound spring steel wire imbedded between two plies
Color: Red
Temperature: -75°F to 500°F Continuous (intermittent to 600°F)
Applications
- Air
- Chemical fumes
- Dust
- Exhaust and Ventilation
- Temperature extremes
- Vacuum and suction
Industries
- Automotive
- Electroplating
- Exhaust systems
- Furnace cleaning
- Paper mills
- Plastics
- Plating equipment
- Racing markets
Features
- Cuffed ends
- Fume removal
- Hi-temp
Details
- Standard length of 3/4" is 10'
- Standard duct for high temperature air flow and fume removal
- Internal ply provides a smooth interior for maximum air flow and minimum friction loss
- UV and weather resistant
- Light weight, easy to install and non-kinking
- Great for handling air, dust, fumes and light powder
- Not recommended for liquids or abrasive materials
- Available as U-9 (one-ply) for lower pressure applications
- Non-standard lengths and cuffs available
U-Lok 1000 - Ultra High Temperature Service Hose
(7)A highly flexible duct made of fine wire reinforced (E-Glass ceramic cloth) that is chemically treated and coated. Ideal for higher temperature fume recovery.
Material: Alumina coated, textile glass fabric reinforced with a fine V4A wire.
Construction: Mechanical bond, galvanized steel helix (also available stainless steel helix)
Diameters: 3” to 24” I.D.
Length: 25 feet
Compression Ratio: 3”-4”=4:1
Temperature Range: -200°F (-129°C) to +1000°F (538°C). Intermittent
Color: Metallic grey
Applications
- High temperature fume recovery
- Scuff resistant
- Flame resistant
*Air velocity should be less than 50 m/sec
*A negative pressure fan system with ambient air inlet is recommended to maximize effectiveness and life of duct. It is important to size the duct diameter according to the exhaust output.
/Asset/u-lok1000-web.jpg
U-Lok 1500
(6)A more robust, two ply high temperature service duct. Two plies high temperature resistant coated fabric offers a longer service life.
Material: Alumina coated, textile glass fabric reinforced with a fine V4A wire.
Construction: Mechanical bond, galvanized steel helix
Diameters: 4” to 24” I.D.
Length: 25 feet
Compression Ratio: 4:1
Temperature Range: -200°F (-129°C) to +1500°F (816°C). Intermittent
Color: Grey
Applications
- Hot air extraction
- Heat shield or compensator
- Furnace construction
- Iron and steel works
*Air velocity should be less than 50 m/sec
/Asset/ulok1500-web.jpg
U-Lok 2000 - Ultra High Temperature Service Hose
(6)This flexible three ply ceramic V4A/SS reinforced duct is designed for ultra high temperature resistance. 3 ply with ceramic textile filler.
Material: Alumina coated, textile glass, fabric reinforced with a fine V4A wire, coated E-Glass ceramic cloth filler
Construction: Mechanical bond, steel helix
Diameters: 4” to 24” I.D.
Length: 25 feet
Compression Ratio: 3:1
Temperature Range: -200°F (-129°C) to +1500°F (816°C). Intermittent
Color: Metallic grey
Applications
- Fume exhaust systems where a negative pressure system is incorporated
- Engine testing, vehicle maintenance; indoor environment
- High temperature fume recovery
- Heat shield or compensator
- Furnace construction
- Iron and steel works
*Air velocity should be less than 50 m/sec
/Asset/ulok2000-web.jpg
U-Lok 900
(7)A hose designed to move hot air from source to site of use, with minimal heat loss. Double jacketed and insulated with 1 inch of fiberglass insulation.
Material: Outer: Polyester/Neoprene - U-Lok 100
Inner: Silicone/Fiberglass - U-Lok 401
Construction: Two-ply fabric over fully encapsulated spring steel helix
Diameters: 2” to 20” I.D.
Length: 12 feet
Bend Radius: 2 X I.D.
Temperature Range: -65°F (-54°C) to +600°F (315°C)
Color: Black outer, Grey inner ply
Applications
- Plastics, industry, drying
- Glass drying
- Outdoor heaters
- Cold air supply
- Hot air supply
/Asset/ulok900-web.jpg
Heat-Flex® Flex-Vest®
(10)Construction
Inner layer: double-ply silicone coated fiberglass fabric hose reinforced with a spring steel wire helix
Outer layer: single-ply neoprene coated polyester fabric hose reinforced with a spring steel wire helix
Temperature Range: -40°F to 250°F, Intermittent to 600°F
Color: Iron oxide red inner layer, black outer layer
Features
- Insulation; 1-inch fiberglass insulation (R-value=4)
- Insulated dryer hose
- Combines flexibility with minimal heat loss
- Suited for air handling applications at low positive and low negative pressures
- Good flexibility
- Excellent external abrasion and chemical resistance
Market Applications
- Aerospace
Heat-Flex® GN
(10)Construction
Double-ply neoprene coated fiberglass fabric hose reinforced with a spring steel wire helix and external filament fiberglass cord
Temperature Range: -40°F to 300°F
Color: Black
Features
- Offers higher temperature characteristics than traditional neoprene hoses
- The narrow pitch allows for tight bending radius while maintaining a smooth air flow
- Non-kinking
- Not recommended for continuous flexing
Market Applications
- A/C ventilation
- Aerospace
- Brake ducting
- Cold air supply
- Defroster/heater
- Diesel/engine exhaust
- Heater
- Limo A/C duct
- Plastic bag machines
- Safety equipment
- Smoke ejectors
- Transmission cooling
- Ventilation
Heat-Flex® NS
(11)Construction
Double-ply fabric hose with a silicone coated fiberglass inner layer and a silicone coated Nomex® outer layer reinforced with a spring steel wire helix and external filament fiberglass cord
Temperature Range: -65°F to 550°F
Color: Inner layer: Iron oxide red; Outer layer: Black
Features
- Nomex® material increases flex life and abrasion resistance
- Suited for high temperature air handling applications
- The narrow pitch allows for tight bending radius while maintaining smooth air flow
- Ideal for applications where constant flexing is involved
- Non-kinking
- Resistant to many oils and solvents, ozone, water, fungus and alkalis
Market Applications
- Automotive
- Exhaust systems
- Garage exhaust
- Glass drying
- Heater
- High temperature
- Rocket support
- Tractor pull exhaust
- Transmission cooling
- Vehicle exhaust systems
