Holedall Fittings
holedall-fittings1
Features:
Both the male and female have octagonal facets for tightening with a wrench. The female in 1 1/2" and larger sizes has lugs for tightening. The stem is expanded to nominal ID of hose for a rigid, uniform, full-flow area.
Features:
Safety Alert: Do not interchange with other manufacturer's fittings. /Asset/API-holedall-petroleum-male.jpg
External Swage Flanged Assemblies
(54) Features:- 150# ASA flange drilling available with carbon steel stem, ferrule and flange, or 316 stainless steel stem, flange and carbon steel ferrule
- Available in other sizes, consult the factory for pricing.
External Swage Uni-Range Male Couplings
(28) Designed for smaller hose systems, these couplings may be used for hose ID's of 1/4" - 1" and come complete with factory assembled stem and ferrule combination.Features:
- Can be swaged or crimped
- Other hose OD's available, consult the factory
- Stainless steel stems are investment cast.
Butt Weld x Heavy Duty Raised End (California Style)
(6) Beveled design for welding to Schedule 40 pipe allows connection to a heavy duty raised end (California style) hose fitting or similar style end. /Asset/heavy-duty-raised-end-x-but.jpg Clamps for IXH Raised End (California Style) Stems
(12) Cast steel clamps for fast assembly when connecting heavy-duty raised end fittings used for concrete. These clamps can be used to connect the ends of pipes or hoses which use the Raised End or California style fittings listed above. Shipped with double lipped gasket and safety pin. All sizes are painted green. Clamp should only be used with safety pin in place. /Asset/clamp-for-IXH-raised-end-st.jpg Internal Expansion Ferrules
(73) For hoses using ferrule sizes IXF48-3 thru IXF48-5 and IXF64-2 thru IXF64-5, consult the factory for working pressures. /Asset/internal-expansion-ferrule.jpg Internally Expanded Permanent Couplings (Scovill Style)
(24) Brass internally expanded permanent couplings are recommended for discharge and suction service. Commonly used in the transfer of fuel to homes, airplanes, ships, etc. The working pressure of the 520-H fitting varies with the size of the fitting, the size and construction of the hose and the media being conveyed. Consult the factory for recommendations. Dixon Holedall stems and ferrules are specifically designed to be used together as a coupling system.Both the male and female have octagonal facets for tightening with a wrench. The female in 1 1/2" and larger sizes has lugs for tightening. The stem is expanded to nominal ID of hose for a rigid, uniform, full-flow area.
Features:
- Male and female stems are machined from bar stock or solid brass forgings; ferrules are available in brass and stainless steel.
- Couplings are compact, light and streamlined to eliminate catching on curbs and shrubs.
- The H520 fittings are designed for internal expansion only.
- Couplings are pre-lubricated for assembly.
- Hand and electrically operated installation equipment is available. Consult factory for pricing and availability.
Safety Alert: Do not interchange with other manufacturer's fittings. /Asset/API-holedall-petroleum-male.jpg
520-H Ferrules
(48) A wide range of 520-H ferrules permits a perfect assembly of a coupling to a corresponding size of hose within commercial tolerances regardless of wall thickness. Eliminates need for large stock of coupling bodies. Consult Dixon for other hose OD's. /Asset/520-H-Ferrule.jpg API Certified Permanently Attached Petroleum Couplings
(17) The following fittings have been tested and are compliant with API 1529 6th edition, Coupling procedures, ferrule recommendations and API test data are available upon request. /Asset/API-holedall-petroleum-male.jpg
Flow Chief Ferrules
(38) Features:- The ferrule ID's are designed in increments of 1/16"
Dixon Sanitary Crimp Ferrules
(24) Features:- Manufactured in AISI 304 stainless steel.
- Ferrules have a surface finish of 63 or better.
