Master-PUR SL-F
(28)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated spring steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive solids, liquids, and gases
- Suction of paper and textile fibers
- Oil-spray extraction
- Transport hose for abrasive solids in fire risk areas
- Woodworking machines
- Exhaust equipment in woodworking industries
- Rear suction hoses on small machines, public utility cleansing and refuse collection vehicles
- Wet and dry process conveyance
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680
- Reinforced by spring steel spiral
- Good flexibility
- Compressible down to 20%
- Small bend radius
- Super lightweight
- High tensile and burst strength
- Highly abrasion-resistant
- Kink-resistant
- Oil/petroleum-proof
- Gas-tight
- Halogen/plasticizer-free
- Good UV/ozone resistance
- Smooth inside, for optimum flow characteristics
- Good chemical resistance
Available on Request
- Special wire colors
- Diameter: up to 24”
- Special lengths up to 50’
- Special diameters metric
Master-PUR SL-F-EC
(28)Material
Hose wall: electrically conductive polyurethane
Spiral: PU-coated spring steel wire
Color: black
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Dangerous areas, where electrical conductivity is demanded
- Special hose for industrial vacuum cleaners
- Suction and transport of paper fibers and wood chips
- Transport of granules
- Suction and transport of abrasive materials, gaseous and liquid media
- Extraction of coarse-grained particles with high flow volume
- Oil-spray extraction
- Protection hose against mechanical damage
Properties
- Surface resistance Ro ≤104 Ohm
- acc. to TRBS 2153 (Zone 0, 20) for flammable liquids/dusts for dissipation of electrostatic charges with grounding on both ends of the helix
- Electrically conductive
- Highly abrasion-resistant
- Good flexibility
- Small bend radius
- Super lightweight
- Oil/petroleum-proof
- Halogen/plasticizer-free
- Good chemical resistance
- Good UV/ozone resistance
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Smooth inside, for optimum flow characteristics
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR SL-F-SS
(28)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated 316 stainless steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive materials
- Clean room applications
- Gaseous and liquid media
- Transport of small particled dusts and powders
- Wet and dry process conveyance
- Stainless steel requirements
Properties
- Surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Highly-abrasion resistant
- Gas-tight
- Good chemical resistance
- Halogen/plasticizer-free
- Very flexible
- Compressible down to 20%
- Super lightweight
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Smooth inside, for optimum flow characteristics
- Washable
- Adhesive-free
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR Performance
(14)Material
Hose wall: pure polyether polyurethane
Spiral: spring steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Transport hose for sand, gravel, grain, granules
- Transport hose for handling and conveying plants
- Everywhere easy-to-clean surfaces are needed
- Suction and transport hose for extremely abrasive solid, liquid and gaseous media
- Transport hose for feeding and cleaning of glass works, mineral processing plants, steelworks, quarries, shipyards and docks, cement works, flat roof graveling
- Other conveyor and loading plants
Properties
- Antistatic, surface resistance Ro <109
- acc. to TRBS 2153 (Zone 0, 20) for flammable liquids/dusts for dissipation of electrostatic charges with grounding on both ends of the helix
- Complies with ATEX 95 Directive 94/9/EC
- Extremely abrasion-resistant, super-strong PU lining
- Flexible
- High tensile strength
- Excellent vacuum-resistance and good pressure-resistance
- Oil/petroleum-proof
- Halogen/plasticizer-free
- Good UV/ozone resistance
- Good chemical resistance
- Smooth inside, for optimum flow characteristics
Available on Request
- Special diameter up to 6"
- Special diameters metric
Master-PUR L-F
(29)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated spring steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive solids, liquids and gases
- Suction of paper and textile fibers
- Transport of small particle dusts and powders
- Oil-spray extraction
- Protection hose against mechanical pressure
- Transport hose for abrasive solids in fire risk areas
- Woodworking machines
- Exhaust equipment in woodworking industries
- Rear suction hoses on small machines, public utility cleansing and refuse collection vehicles
- Wet and dry process conveyance
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Reinforced by spring steel spiral
- Good flexibility
- Small bend radius
- Lightweight
- High tensile and burst strength
- Highly abrasion-resistant
- Kink-resistant
- Oil/petroleum-proof
- Gas-tight
- Halogen/plasticizer-free
- Good UV/ozone resistance
- Smooth inside, for optimum flow characteristics
- Good chemical resistance
Available on Request
- Special wire colors
- Diameter: up to 24"
- Special lengths up to 50'
- Special diameters metric
Master-PUR L-F-EC
(30)Material
Hose wall: electrically conductive polyurethane
Spiral: PU-coated spring steel wire
Color: black
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Dangerous areas, where electrical conductivity is demanded
- Special hose for industrial vacuum cleaners
- Suction and transport of paper fibers and wood chips
- Transport of granules
- Suction and transport of abrasive materials, gaseous and liquid media
- Extraction of coarse-grained particles with high flow volume
- Oil-spray extraction
- Protection hose against mechanical damage
Properties
- Surface resistance Ro < 104 Ohm
- acc. to TRBS 2153 (Zone 0, 20) for flammable liquids/dusts for dissipation of electrostatic charges with grounding on both ends of the helix
- Electrically conductive
- Highly abrasion-resistant
- Good flexibility
- Lightweight
- Small bend radius
- Super lightweight
- Oil/petroleum-proof
- Halogen/plasticizer-free
- Good chemical resistance
- Good UV/ozone resistance
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Optimum flow characteristics
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR L-F-SS
(29)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated 316 stainless steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive materials
- Clean room applications
- Gaseous and liquid media
- Transport of small particled dusts and powders
- Wet and dry process conveyance
- Stainless steel requirements
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Highly abrasion-resistant
- Gas-tight
- Good chemical resistance
- Halogen/plasticizer-free
- Very flexible
- Lightweight
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Smooth inside, for optimum flow characteristics
- Washable
- Adhesive-free
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR H-F
(29)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated spring steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive solids, liquids and gases
- Suction of paper and textile fibers
- Transport of large amounts of abrasive media
- Transport hose for abrasive solids in fire risk areas
- Woodworking machines
- Exhaust equipment in woodworking industries
- Rear suction hoses on small machines, public utility cleansing and refuse collection vehicles
- Wet and dry process conveyance
Properties
- Antistatic, surface resistance Ro < 109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Good flexibility
- Small bend radius
- Heavyweight
- High tensile and burst strength
- Highly abrasion-resistant
- Kink-resistant
- Oil/petroleum-proof
- Solvent-resistant
- Gas-tight
- Halogen/plasticizer-free
- Good UV/ozone resistance
- Improved pressure and vacuum characteristics
- Smooth inside, for optimum flow characteristics
- Good chemcial resistance
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR H-F-EC
(30)Material
Hose wall: electrically conductive polyurethane
Spiral: PU-coated spring steel wire
Color: black
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Dangerous areas, where electrical conductivity is demanded
- Special hose for industrial vacuum cleaners
- Suction and transport of paper fibers and wood chips
- Transport of granules
- Suction and transport of abrasive materials, gaseous and liquid media
- Extraction of coarse-grained particles with high flow volume
- Oil-spray extraction
- Protection hose against mechanical damage
Properties
- Surface resistance Ro ≤104Ohm
- acc. to TRBS 2153 (Zone 0, 20) for flammable liquids/dusts for dissipation of electrostatic charges with grounding on both ends of the helix
- Electrically conductive
- Highly abrasion-resistant
- Good flexibility
- Good bend radius
- Heavyweight
- Oil/petroleum-proof
- Gas-tight
- Halogen/plasticizer-free
- Good chemical resistance
- Good UV/ozone resistance
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Optimum flow characteristics
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR H-F-SS
(29)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated 316 stainless steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive materials
- Clean room applications
- Gaseous and liquid media
- Transport of abrasive dry food and powders
- Wet and dry process conveyance
- Stainless steel requirements
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Highly abrasion-resistant
- Gas-tight
- Good chemical resistance
- Halogen/plasticizer-free
- Good flexibility
- Heavyweight
- Improved pressure and vacuum characteristics
- High tensile and burst strength
- Smooth inside, for optimum flow characteristics
- Washable
- Adhesive-free
Available on Request
- Special lengths up to 50’
- Special diameters metric
Master-PUR HH-F
(9)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated spring steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive materials
- Silo trucks and loading equipment
- Special construction for extremely abrasive bulk and solids
- Transport hose for difficult materials, such as sand, gravel, grain
- For highest demands of service-life and abrasion resistance
- Transport hose for abrasive solids in fire risk areas
- Woodworking machines
- Exhaust equipment in woodworking industries
- Rear suction hoses on small machines, public utility cleansing and refuse collection vehicles
- Wet and dry process conveyance
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Long service life
- High tensile and burst strength
- High vacuum and pressure rating
- Highly abrasion-resistant
- Heavyweight
- Oil/petroleum-proof
- Gas-tight
- Halogen/plasticizer-free
- Good UV/ozone resistance
- Smooth inside, for optimum flow characteristics
- Good chemical resistance
Available on Request
- Other diameters between 2" and 6" available
- Hydrolysis-proof
- Electrically conductive
- Special diameters metric
Master-PUR HH-F-SS
(9)Material
Hose wall: 100% pure polyester polyurethane, highly abrasion-resistant
Spiral: PU-coated 316 stainless steel wire
Color: transparent
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Food industry
- Pharmaceutical industry
- Suction and transport hose for abrasive materials
- Clean room applications
- Gaseous and liquid media
- Transport of small particled dusts and powders
- Wet and dry process conveyance
- Stainless steel requirements
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Highly abrasion-resistant
- Gas-tight
- Good chemical resistance
- Halogen/plasticizer-free
- Improved pressure and vacuum characteristics
- Tensile and burst strength
- Smooth inside, for optimum flow characteristics
- Washable
- Adhesive-free
Available on Request
- Other diameters between 2" and 6" available
- Special diameters metric
Master-PUR STEP
(10)Material
Hose wall: 100% pure polyester polyurethane
Spiral: polyurethane
Color: hose wall clear with blue spiral
Temperature Range: -22°F to +195°F, Intermittent to +260°F
Applications
- Ideally suitable as suction hose where conventional hoses can be deformed by bad operating conditions on the floor
- Dust and powder conveyance
- Wood processing
- Light food processing
- Pharmaceutical industry
- Protective hose
Properties
- Antistatic, surface resistance Ro <109
- Flame-resistant
- Hose wall (conforms to FDA food contact as described in book 21, section 177.2600 and 177.1680)
- Crush-resistant
- High resistance to mechanical loads
- Highly abrasion-resistant
- Good flexibility
- Super lightweight
- Optimum flow characteristics
- Oil/petroleum-proof
- Halogen/plasticizer-free
- Good chemical resistance
- Good UV/ozone resistance
- High tensile and burst strength
Available on Request
- Special lengths up to 50’
- Static wire available on request
- Special diameters metric
ARH Smooth Interior Plastic Hose
(12)Construction
Material: Thermoplastic rubber with an external polypropylene helix
Color: black with grey helix
Temperature: -60°F to 275°F (intermittent to 300°F)
Applications
- Air
- Chemical fumes
- Dust
- Exhaust and Ventilation
- General purpose
- Material handling
- Moisture/Hydraulic
- Special purpose
- Temperature extremes
- Vacuum and suction
Industries
- Computer chip manufacturing
- Conduit
- P.C. board manufacturing
- RV manufacturing
- Ship yards
- Truck and bus manufacturing
Features
- Abrasion resistant
- Chemical resistant
- Drag resistant
- Moisture resistant
- UV/Ozone resistant
Details
- Larger diameters available up to 10"
- Smooth interior for easy flow
- Excellent crush resistance
- External helix allows for rough use in applications where the hose will be dragged
- Ideal for dust collection, fume exhaust and conduit applications
- Available in white
- Materials used in ARH-White are FDA acceptable
- Available with integral cuffs
/Asset/ARH-web.jpg
UFD-AP Severe Service Plastic Hose
(9)Construction
Material: All thermoplastic polyether polyurethane reinforced with an ABS helix
Color: clear with safety yellow helix
Temperature: -40°F to 200°F
Applications
- Air
- Chemical fumes
- Chips/debris/granules
- Dust
- Exhaust and Ventilation
- Food and beverage
- Material handling
- Moisture/Hydraulic
- Petroleum/oil
- Vacuum and suction
Industries
- Foundries
- Furnace cleaning
- Lawn mowers
- Leaf collectors
Features
- Abrasion resistant
- Drag resistant
- FDA/Food safe
- Moisture resistant
- Puncture resistant
- UV/Ozone resistant
Details
- Smooth interior
- Lightweight and highly flexible
- Suitable replacement for thicker walled EPDM hoses
- The clarity of the hose allows the user to check for blockages
- Helix provides added durability in applications where the hose is being dragged
/Asset/UFD-AP-web.jpg
CVD-AP Light Duty Material Transfer Hose
(15)Construction
Material: Clear polyvinylchloride reinforced with a polyvinylchloride helix
Color: clear with black helix
Temperature: -10°F to 160°F
Applications
- Air
- Chemical fumes
- Dust
- Exhaust and Ventilation
- Material handling
- Special purpose
- Vacuum and suction
Industries
- Insulation companies
- Lawn mowers
- Leaf collectors
Features
- Chemical resistant
- Drag resistant
- Moisture resistant
Details
- Economical
- Smooth interior to minimize friction loss
- Crush resistant
- Helix provides added durability where the hose is being dragged
- Lightweight, durable and great bending characteristics
- Ideal for sawdust collection, ventilation, fume removal, light duty material handling and leaf collection
/Asset/CVD-AP-web.jpg
333 Insulation Blowing Hose
(6)Construction
Material: Clear polyethylene reinforced with polyethylene helix
Color: clear with black helix
Temperature: -30°F to 130°F
Applications
- Air
- Dust
- Exhaust and Ventilation
- Food and beverage
- Material handling
- Moisture/hydraulic
- Special purpose
- Vacuum and suction
Industries
- Insulation companies
Features
- Abrasion resistant
- Chemical resistant
- Drag resistant
- FDA/Food safe
- Moisture resistant
Details
- Crush resistant
- Clear wall allows user to detect blockages
- Great flexibility
- Excellent for insulation blowing applications
- Materials are FDA acceptable
- Available in integral cuffs
- Screw-on cuffs available
/Asset/333-web.jpg
Extendo-Duct® Material Handling Ducting
(10)Construction
Polypropylene/wire reinforced chemical fume air ducting hose
Temperature Range
-4°F (-20°C) to 175°F (80°C)
Color
Brown or white
Features
- Highly flexible
- Non-kinking
- Self-supporting
- Highly extendible and contractible
- Simple interlock connection
- Light weight
- Chemically-resistant, with no off-gassing
Applications
- Air conditioning, spot cooling, and heating systems
- Room air exhaust conveying and ventilation
- Dust collection
- Fume removal
- OEM equipment applications
/Asset/extendo-duct.jpg
U-Lok-1200 Acrylic Food Material Transfer Hose
(7)Durable medium weight food grade fabric duct. This product possesses good abrasion resistance and fire retardant qualities.
Material: White acrylic on polyester
Construction: Mechanical bond, galvanized helix
Diameters: 3” to 24” I.D.
Bend Radius: 1.5 X I.D.
Length: 25 feet
Compression Ratio: 5:1
Temperature Range: -20°F (-29°C) to +250°F (121°C)
Color: White
Applications
- Clean room environment
- Cool or hot air supply
- Air handling, fume control
- Meets FDA regulations
- Hospitals, food establishments, computer rooms
- Meets UL94V-0 and Federal Method 5903
*Air velocity should be less than 50 m/sec
/Asset/u-lok_1200-web.jpg
UFD Severe Service Duct
(13)Construction
Material: Thermoplastic polyether polyurethane reinforced with a wire helix
Color: clear or black
Temperature: -65°F to 200°F
Applications
- Air
- Chemical fumes
- Chips/dust/granules
- Dust
- Exhaust and Ventilation
- Food and beverage
- General purpose
- Material handling
- Moisture/hydraulic
- Oil mist
- Petroleum/oil
- Special purpose
- Vacuum and suction
Industries
- Chemical plants
- Corrugated box manufacturing
- Furnace cleaning
- Furniture manufacturing
- Flour and grain mills
- Lawn mowers
- Leaf collectors
- Paper mills
- Pharmaceutical
- RV manufacturing
- Saw mills
- Sheet metal houses
- Street sweeping
- Textiles
Features
- Abrasion resistant
- Cuffed ends
- FDA/food safe
- Fume removal
- Moisture resistant
- Oil resistant
- UV/ozone resistant
Details
- Superior abrasion resistance
- Excellent flex fatigue resistance
- Allows users to locate blockages
- Handles higher pressure and vacuums than standard ducting
- Materials used in UFD-Clear are FDA acceptable
- Available with cuffed end finishes
- Available in metric diameters
/Asset/UFD-web.jpg
UFD.020 Lightweight Oil Mist Duct
(11)-
Construction
Material: Thermoplastic polyether polyurethane reinforced with a wire helix
Color: clear or black
Temperature: -65°F to 200°F
Applications- Electroplating
- Lawn mowers
- Metal fabrication
- Saw mills
Features
- Abrasion resistant
- Cuffed ends
- FDA/food safe
- Fume removal
- Moisture resistant
- Oil resistant
- UV/ozone resistant
Details
- Lightweight alternative to UFD
- Excellent flexibility
- Transparency of the UFD-Clear allows users to locate blockages
- Materials used in UFD-Clear are FDA acceptable
- Ideal for oil mist applications
- Available with cuffed end finishes
UFD.060 Severe Service Heavier Duty Duct
(10)Construction
Material: Heavier walled thermoplastic polyether polyurethane reinforced with a wire helix
Color: translucent blue
Temperature: -65°F to 200°F
Applications
- Air
- Chemical fumes
- Chips/dust/granules
- Dust
- Exhaust and Ventilation
- Food and beverage
- Material handling
- Moisture/hydraulic
- Oil mist
- Petroleum/oil
- Special purpose
- Vacuum and suction
Industries
- Foundries
- Furnace Cleaning
- Flour and grain mills
- Leaf collectors
- Paper mills
- Saw mills
- Street sweeping
Features
- Abrasion resistant
- Fume removal
- Moisture resistant
- Oil resistant
- Puncture resistant
Details
- Superior abrasion resistance, moisture resistant, puncture resistantm and UV/Ozone resistant
- Excellent for leaf and lawn collection, street sweepers, and other severe service applications
- Available in 10' lengths during leaf collection season
/Asset/UFD-060-web.jpg
630 ED
(6)Medium duty rubber blowing and ducting hose
Construction
EPDM rubber, polypropylene helix, smooth bore, corrugated O.D.
Temperature Ranges
-40°F to 158°F
Features
- Weatherable
- Corrugated O.D.
- Smooth bore
Applications
- Hay baling
- Street refuse
- Grain dust
- Cotton pickers
- Wood Chips
- Air reels
- Straw blowing
- Leaf and grass collection
Kanaline SR Water Suction & Discharge
(7)Water suction and discharge hose for heavy-duty applications requiring combined vacuum and higher working pressures
Construction
Flexible PVC, rigid PVC helix, synthetic braiding, smooth bore, corrugated O.D.
Temperature Ranges
-13°F to 140°F
Features
- Lightweight and flexible
- External helix provides for easy drag
- Rated for both suction and discharge
- Clear sidewall permits visual check of material flow
/Asset/Kanaline-SR-web.jpg
300 EPDM
(8)Heavy duty liquid suction hose for use in construction dewatering, liquid wastes, septic hauling, septic tank cleaning, agricultural applications, and marine use
Construction
EPDM rubber, polyethylene helix, smooth bore, corrugated O.D.
Temperature Ranges
-40°F to 140°F
Features
- Weatherproof
- Easy drag
- Flexible
- Lightweight
- Smooth bore
- Long life
- Economical
Applications
- Agricultural chemicals
- Grains
- Abrasives
- Water
- Slurry
- Seed
- Dry and liquid fertilizers
220 RS
(6)Heavy duty liquid suction hose for use in construction dewatering, liquid wastes, septic hauling, septic tank cleaning, agricultural applications, and marine use.
Construction
SBR rubber, rigid PVC helix, smooth bore, smooth O.D.
Temperature Ranges
-40°F to 140°F
Features
- Weatherproof
- Flexible
- Lightweight
- Smooth bore
- Economical
Applications
- Rough construction uses
- Waste removal
- Industrial fluid handling
- Cesspool cleaning
- Sewer cleaning
- Marine use
- Septic handling
- Agricultural applications
